Standard Ignition Starter Drive P/N:SDN-55
Standard Motor Products
Standard Ignition SDN-5 starter drive for the 1957 Ford Ranchero V8 4.4L, the 1957-1958 Ranchero 6-cylinder 3.7L, the 1957-1959 Ranchero 6-cylinder 3.6L, V8 4.8L or 5.8L, the 1960-1961 Ranchero 6-cylinder 2.4L, the 1961 Ranchero 6-cylinder 2.8L, the 1962 Ranchero V8 4.3L and other vehicles engages the flywheel ring gear to turn the engine over at start-up.
Grinding at start-up or a starter that spins without turning the engine can be a sign of a worn starter drive. With the engine off, look over the battery terminals for corrosion or looseness first, since poor connections also slow cranking. This listing is one starter drive, and the 1957 Ford Ranchero V8 4.4L takes one.
It also fits the 1957-1958 Ford F-100 V8 4.4L, the 1957-1959 F-100 V8 5.8L, the 1957-1961 F-100 6-cylinder 3.6L, the 1957-1962 F-100 V8 4.8L, the 1960-1962 F-100 V8 5.4L and the 1961 F-100 6-cylinder 4.3L. It fits the 1957-1958 Ford P-350 V8 4.4L, the 1957-1961 P-350 6-cylinder 3.6L, the 1958-1962 P-350 V8 4.8L and the 1961 P-350 6-cylinder 2.8L as well. For any other Ford, Edsel, Lincoln or Mercury, find your year and engine in the "Vehicles it fits" section.
Interchange: SD553 · 1CM11350A · 1CM11350C · C1AZ11350A · C1AZ11350AC
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition SDN-5 starter drive fit a 1957 Ford Ranchero with the V8 4.4L?
Yes, Standard Ignition SDN-5 fits the 1957 Ford Ranchero V8 4.4L and the 1957-1958 Ranchero 6-cylinder 3.7L. Other years and engines are in the "Vehicles it fits" section.
Is the SDN-5 starter drive right for the 1960-1962 Ford F-100 V8 5.4L?
Yes. Standard Ignition SDN-5 fits the 1960-1962 Ford F-100 V8 5.4L, and the 1961 F-100 6-cylinder 4.3L takes the same starter drive.
Where is this Standard Ignition starter drive made?
The country of origin for this starter drive is India.
Why would a starter spin without turning the engine?
A worn starter drive can be one reason, because it is the piece that engages the flywheel ring gear. Grinding at start-up is another sign; a shop can test the starting system.
Can this starter drive replace part number C1AZ11350A?
Yes, Standard Ignition SDN-5 is cross-referenced to C1AZ11350A. The Interchange line also gives 1CM11350A, 1CM11350C, C1AZ11350AC and SD553.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.