Standard Ignition Steering Angle Sensor P/N:SWS56
Standard Motor Products
Standard Ignition SWS19 stability control steering angle sensor for the 2003-2017 Chevrolet Express 2500 and other vehicles reports the steering wheel's position to the stability control system.
A stability control warning light, or stability control that stops working, can mean the steering angle sensor has failed. With the engine off, look the connector over for bent pins, corrosion or a loose plug before you replace anything, and let a shop test the rest.
Listed for a wide range of Chevrolet and GMC models, including the 2003-2017 Chevrolet Express 3500 and the 2003-2017 GMC Savana 2500. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One steering angle sensor. This listing is one sensor, and each vehicle takes one. Hardware, turn signal controls, lighting controls, cruise control options and wiper control options are not included, so plan on new fasteners, as the old ones may not be reusable.
Interchange: S8512 · SU7862 · SWS119 · 26109034
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition SWS19 steering angle sensor fit the 2003-2017 Chevrolet Express 2500?
Yes. Standard Ignition SWS19 is listed for the 2003-2017 Chevrolet Express 2500. Open the "Vehicles it fits" section to check your exact model and engine.
Does the Standard Ignition SWS19 include turn signal or cruise control switches?
No. Standard Ignition SWS19 is the sensor alone. Turn signal, lighting, cruise control and wiper control options are not included, and neither is hardware.
How many pins does the SWS19 connector have?
The rectangular plug-in connector is female and holds 8 male pins. There is one connector on the sensor.
Could a bad steering angle sensor turn on my stability control light?
Yes, it can, because the stability control system reads steering wheel position from this sensor. Wiring and other faults can light it too, so a shop can test it.
Does Standard Ignition SWS19 replace SWS119?
Yes. SWS119 is one of the numbers Standard Ignition SWS19 interchanges with.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.