Keep your stability-control system reading the road correctly with the Standard Ignition Suspension Yaw Sensor YA199. It installs as a direct-fit replacement for the 2009 and 2011-2014 Acura TSX and the 2013 Honda CR-Z, restoring the signal your electronic stability control relies on.
A yaw sensor measures the vehicle's rate of rotation about its vertical axis and reports that motion to the stability-control module, which compares it against steering and wheel-speed inputs to help the system decide when to intervene.
- Core job: senses yaw motion and sends it to the ESC/stability-control system.
- Direct-fit: designed to replace the original sensor on the listed Acura and Honda applications.
- Signs it may need replacing: a stability-control, traction-control, or VSA warning light, or related fault codes stored in the module.
- Diagnose first: confirm the sensor is the cause before replacing, since those warnings can have other sources.
If a failed yaw sensor is the cause of your stability-control fault, this unit replaces it.
Interchange: YW299 · YR399 · 39960SZTGO1 · Manufacturer part number YA199.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does the YA199 yaw sensor do?
It measures the vehicle's rate of rotation about its vertical axis and reports that motion to the electronic stability-control module, which uses it to help decide when to intervene.
Which vehicles does the YA199 fit?
It's a direct-fit replacement for the 2009 and 2011-2014 Acura TSX and the 2013 Honda CR-Z. Check the Buyer's Guide tab to confirm it matches your vehicle.
What numbers does this sensor interchange with?
It cross-references YW299, YR399, and 39960SZTGO1. Its own manufacturer part number is YA199.
What are the signs my yaw sensor may need replacing?
A stability-control, traction-control, or VSA warning light and related stored fault codes can indicate a faulty yaw sensor. Diagnose the cause before replacing, as these can have other sources.
Will replacing this sensor turn off my stability-control light?
If a failed yaw sensor is the cause of the fault, this unit replaces it. Because the warning can stem from other issues, confirm the sensor is the problem before installing.
Write a Review