If a worn switch is why your turn signals quit responding, the Standard Ignition switch TW-53 is the replacement turn signal switch for the 1993-1996 Buick Century and the 1993 Oldsmobile Cutlass Cruiser. It is a direct-fit replacement for the listed applications. When you move the turn signal lever, the switch completes the circuit to the left or right turn signal lamps.
Signs this part may need replacing: The turn signals work only intermittently or only in one direction, they don't come on when you move the lever, or they don't cancel after a turn. A failed flasher, bulb, or wiring fault can cause similar symptoms, so diagnose the circuit before replacing the switch.
See the Buyer's Guide tab for engine details.
Interchange: S3262 · SW809 · DL6313 · 1995980
This part cross-references / interchanges with the following part numbers:
Will this switch fit my 1993-1996 Buick Century?
Yes. The TW-53 is listed for the 1993-1996 Buick Century. See the Buyer's Guide tab for engine details.
What other vehicles does the Standard Ignition TW-53 fit?
Besides the 1993-1996 Buick Century, it is listed for the 1993 Oldsmobile Cutlass Cruiser.
Which part numbers does the TW-53 interchange with?
It cross-references S3262, SW809, DL6313 and 1995980.
How can I tell if my turn signal switch is failing?
Signals that work intermittently, only one way, or not at all can be signs of a worn switch. A bad flasher, bulb or wiring can cause the same signs, so test the circuit first.
Is the TW-53 tested for performance?
Yes. Standard Ignition tests 100% of its parts to verify both mechanical and electrical switching performance.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
