Mevotech Supreme Steering Tie Rod End P/N:MS40723
Mevotech Supreme MDS80434 front right outer tie rod end for the 1994-2002 Chevrolet C3500HD and other vehicles passes steering input from the linkage to the wheel. The Mevotech Supreme steering tie rod end is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
A worn tie rod end can show up as loose or wandering steering, a clunk over bumps or uneven front tire wear. Other steering and suspension joints can cause similar signs, so with the engine off and cool, look at the dust boot for tears or grease leaks before you replace anything. This listing is one tie rod end for the front right outer position; the left side is a separate part, and both sides are normally replaced together.
It is a direct-fit replacement for the 1994-2002 Chevrolet C3500HD and the 1994-2002 GMC C3500HD.
Fit and size
Build and materials
One tie rod end with a dust boot, SAE grease fitting, castle nut and cotter pin. This listing holds one; the front right outer position takes one.
Interchange: 580-086
19310336 · TA5706 · TC90414 · TC90414PR · 12375396 · 26044314 · IDS80434 · DS80434 · 29044048 · 26065 · 4101091 · X07TE0599
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme MDS80434 fit the 1994-2002 GMC C3500HD?
Yes. Mevotech Supreme MDS80434 fits the 1994-2002 GMC C3500HD and the 1994-2002 Chevrolet C3500HD, in the front right outer position.
Does this tie rod end come with a castle nut and cotter pin?
Yes. This front right outer tie rod end comes with a castle nut, cotter pin, dust boot and SAE grease fitting. Nothing else is listed in the box.
What is the bearing in the Mevotech Supreme MDS80434 made of?
The MDS80434 has a sintered metal bearing in a steel housing, with a neoprene dust boot. The stud is threaded, and the joint is not adjustable.
How can I tell if a front right outer tie rod end is worn?
Loose or wandering steering, a clunk over bumps or uneven front tire wear can point to a worn joint. A shop can test for play and confirm the cause.
Is the Mevotech Supreme MDS80434 pre-greased, or do I need to grease it?
Yes, the MDS80434 is pre-greased, so it needs no greasing before installation. It is also greaseable, and the SAE grease fitting is included for later service.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.