Sunsong Brake Hydraulic Hose P/N:2202853
Keep pressurized brake fluid moving to the front left wheel with the Sunsong brake hose, MPN 2201015. This Brake Hydraulic Hose is cataloged for the front left position as a direct-fit replacement for the 1991-1997 Chevrolet S10, 1991-1994 Chevrolet S10 Blazer, 1991 GMC S15 Jimmy, 1991-1997 GMC Sonoma, 1991 GMC Syclone, 1991-1994 and 1996 Oldsmobile Bravada, 1992-1997 GMC Jimmy, 1992-1993 GMC Typhoon and 1995-1997 Chevrolet Blazer. See the Buyer's Guide tab for engine-specific details.
A brake hose is the flexible link between the vehicle's rigid brake line and the brake at the wheel. It has to hold hydraulic pressure while it moves with the steering and suspension. Sunsong, a vertically integrated manufacturer of automotive fluid transfer hoses and lines, designs this hose for exact form, fit and function.
Hoses with banjo end fittings come with new copper washers for proper sealing. A brake hose may need replacing if you notice a soft or spongy pedal, visible cracks, bulging or chafing on the hose, or brake fluid leaking near the wheel. Have the brake system inspected to confirm the cause. After installation, bleed the brakes as the service procedure directs.
Interchange: 1474-17433 · 150.66059 · 350-47273
18J2848 · 77853 · BH38869 · SP8769 · BHA38869 · H38869 · 17989771 · 22111829 · 22113471 · 38869 · BH124597 · 147417433 · 15066059 · 35047273
This part cross-references / interchanges with the following part numbers:
What does a Sunsong brake hydraulic hose do?
It is the flexible section that carries pressurized brake fluid from the rigid brake line to the brake at the wheel. It flexes as the steering and suspension move.
Which position does Sunsong 2201015 fit?
It is cataloged for the front left position on the listed applications. See the Buyer's Guide tab for the full application list.
Does it fit the 1996 Oldsmobile Bravada?
Yes. It is listed for the 1991-1994 and 1996 Oldsmobile Bravada, along with the Chevrolet S10, S10 Blazer and Blazer and several GMC models. See the Buyer's Guide tab for details.
Does this hose meet brake hose safety standards?
Sunsong states its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards. Each hose is high-pressure tested before it leaves the factory.
Are copper washers or brackets included?
New copper washers come with hoses that use banjo end fittings. Brackets, grommets, guards, clips and sleeves are supplied as required for the application.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.