Keep pressurized brake fluid flowing firmly to the wheels with the Sunsong Brake Hydraulic Hose 2201072 — a precision-engineered, direct-fit replacement for the 1994-1997 Ford Escort [All] and the 1994-1997 Mercury Tracer [All]. A brake hydraulic hose carries pressurized fluid from the vehicle's fixed hard line to the caliper, flexing with suspension and wheel movement while containing that fluid under pressure; cracking, bulging, or soft pedal feel are signs the original hose may need replacing.
- Construction: EPDM hose with high-grade steel tubing that is electroplated with a zinc coating for corrosion and rust resistance against high humidity, road salt, water, and grime.
- Fittings: Banjo end fitting (10 mm) and a female end fitting (10 mm), with a 446 mm / 17.55 in overall length. The banjo end includes new copper washers for proper sealing.
- Standards: DOT approved; built to meet or exceed DOT, FMVSS 106, and SAE J1401 requirements.
- Tested & equipped: Each hose is high-pressure quality-tested before leaving the factory and includes a bracket, plus grommets, molded plastic guards, wire clips, and protective sleeves as required.
The listed applications use two hoses per vehicle. Country of origin: Thailand. Manufacturer part number 2201072.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does the Sunsong 2201072 brake hose do?
It carries pressurized brake fluid from the vehicle's fixed hard line to the caliper, flexing with suspension and wheel movement while containing the fluid under pressure.
What vehicles does this hose fit?
It is a direct-fit replacement for the 1994-1997 Ford Escort [All] and 1994-1997 Mercury Tracer [All]. Check the Buyer's Guide tab to confirm your exact vehicle.
Are copper washers and a bracket included?
Yes. The banjo end fitting includes new copper washers for proper sealing, and a bracket plus grommets, molded plastic guards, wire clips, and protective sleeves are supplied as required.
What standards does this brake hose meet?
It is DOT approved and is built to meet or exceed DOT, FMVSS 106, and SAE J1401 requirements, and each hose is high-pressure tested before leaving the factory.
How many hoses do I need?
The listed applications use two per vehicle. Each hose is sold individually, so order two for a complete replacement; replacing both together supports balanced braking.
Write a Review