Keep brake fluid pressure flowing to the rear brakes with the Sunsong brake hose 2201110, a rear brake hydraulic hose that carries fluid from the vehicle's rigid brake line to the brake at the wheel and flexes as the suspension moves. It is a direct-fit replacement for many vehicles, among them the 1991-1992 Chevrolet Lumina, 1991-1993 Pontiac Grand Prix and 1991-1992 Buick Regal. See the "Vehicles it fits" section for the full list and engine details.
Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It designs its hoses around what installers need and to deliver exact form, fit and function.
Signs a brake hose may need replacing include cracking, bulging or chafing on the hose, fluid seeping near the wheel, or a soft brake pedal. If a worn rear hose is the cause, this part replaces it. Bleed the brake system after installation as directed by the vehicle service information.
Interchange: 1474-17442 · 150.62337
18J856 · 77844 · BH38907 · SP8743 · BHA38907 · H38907 · 17998501 · 17999549 · 18020124 · 22111975 · 38907 · BH124746 · 147417442 · 15062337
This part cross-references / interchanges with the following part numbers:
What does a rear brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's rigid brake line to the rear brake and flexes as the suspension moves. This Sunsong part is a rear-position hose for the listed applications.
Which vehicles does the Sunsong brake hydraulic hose 2201110 fit?
It is listed for many vehicles, among them the 1991-1992 Chevrolet Lumina, 1991-1993 Pontiac Grand Prix and 1991-1992 Buick Regal. See the "Vehicles it fits" section for the full list and engine details.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Does the hose come with copper washers and brackets?
Sunsong hoses with banjo end fittings include new copper washers for sealing. Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required.
What are signs a brake hose may need replacing?
Common signs include cracking, bulging or chafing on the hose, fluid leaking near the wheel, or a soft brake pedal. These symptoms can have other causes, so diagnose the brake system before you replace parts.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
