Keep hydraulic pressure flowing to your front brakes with the Sunsong brake hydraulic hose, part number 2201172, a front brake hose built for exact form and fit. It is a direct-fit replacement for many vehicles, among them the 1977-1978 Chevrolet Impala, 1977-1978 Chevrolet Caprice and 1977-1985 Oldsmobile Delta 88. See the Buyer's Guide tab for the full list and engine details.
This flexible hose links the vehicle's rigid brake line to the front brake. It carries pressurized brake fluid from the master cylinder and allows for suspension and steering movement. Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines, with a stated goal of exceeding industry quality standards.
Signs a Sunsong brake hose may need replacing include a soft or spongy pedal and fluid seepage at the hose or fittings. Cracking, bulging or chafing of the outer cover is another sign.
Interchange: 1474-17540 · 150.62018 · 350-47028
147417540 · 15062018 · 35047028 · 18J70 · 77036 · BH97664 · SP5497 · BHA97664 · H97664 · 77036Z · 9760402 · 36797 · BH36797 · BH96763
This part cross-references / interchanges with the following part numbers:
Which vehicles does part 2201172 fit?
It fits the front brake on the 1977-1978 Chevrolet Impala, 1977-1978 Chevrolet Caprice and 1977-1985 Oldsmobile Delta 88, among others. See the Buyer's Guide tab for the full list.
What standards does this brake hose meet?
This hose meets or exceeds DOT, FMVSS 106 and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Does it come with brackets and copper washers?
Brackets, grommets, guards, wire clips and sleeves are included when the application requires them. Hoses with banjo end fittings include new copper washers for proper sealing.
What are signs a front brake hose may need replacing?
Common signs include a soft or spongy pedal, fluid leaks at the hose or fittings, and cracks, bulges or chafing on the hose cover. Have the brake system inspected to confirm the cause.
Do I need to bleed the brakes after installing it?
Yes. Replacing a brake hose opens the hydraulic system, so the brakes must be bled afterward. Follow the vehicle service information for the correct fluid and procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
