Keep brake fluid flowing to the front right wheel with the Sunsong brake hose 2201336, the flexible hydraulic link between the vehicle's rigid brake line and the brake at that corner. It is a direct-fit replacement for the 1999-2000 and 2002-2009 Subaru Legacy, the 2002-2016 Subaru Impreza, and the 2005-2006 Saab 9-2X. See the "Vehicles it fits" section for engine-specific details.
Sunsong is a vertically integrated manufacturer that researches, develops, and builds automotive fluid transfer hoses and lines. It designs its products around what installers need, aims to exceed industry quality standards, and targets exact form, fit, and function.
- Standards compliance: Meets or exceeds DOT, Federal Vehicle Safety Standards (FMVSS 106), and SAE J1401 standards.
- Pressure-tested: Each hose goes through a high-pressure quality assurance test before it leaves the factory.
- Corrosion-resistant tubing: Where a hose uses tubing, Sunsong manufactures it from high-grade steel and electroplates it with a zinc coating. The coating resists rust and corrosion from high humidity, road salt, water, and grime.
- Hardware as required: Brackets, grommets, molded plastic guards, wire clips, and protective sleeves are included where the application calls for them. Hoses with banjo end fittings come with new copper washers for proper sealing.
A soft or spongy brake pedal, brake fluid seeping at the hose or its fittings, or a hose cover that is cracked, chafed, or bulging can be signs a brake hydraulic hose may need replacing. If the front right hose is the cause, this Sunsong brake hydraulic hose replaces it. Bleed the brake system after installation, following the vehicle's service information.
Frequently Asked Questions
Which wheel position is Sunsong 2201336 for?
It is cataloged for the front right position on the listed 1999-2000 and 2002-2009 Subaru Legacy, 2002-2016 Subaru Impreza, and 2005-2006 Saab 9-2X applications.
What standards does this brake hose meet?
Sunsong states its brake hoses meet or exceed DOT, FMVSS 106, and SAE J1401 standards. Each hose is also high-pressure tested before it leaves the factory.
Are copper washers included?
Sunsong includes new copper washers with its brake hoses that use banjo end fittings, so the connection seals properly.
Do I need to bleed the brakes after installing it?
Yes. Opening the hydraulic system lets air in, so bleed the brakes after installation following the vehicle's service information.
What are signs a brake hose may need replacing?
Warning signs include a soft or spongy pedal, fluid leaking at the hose or fittings, or a cracked, chafed, or bulging hose cover. Diagnose the cause before replacing parts.
