Keep firm, responsive braking flowing to the front-left corner with the Sunsong Brake Hydraulic Hose 2201699. This flexible hydraulic line carries pressurized brake fluid from the vehicle's hard line to the caliper, flexing with suspension and steering travel while holding pressure. It's a direct-fit replacement for the front-left position on the 2006-2011 Hyundai Azera and 2006-2010 Hyundai Sonata — see the Buyer's Guide tab for engine-level fitment.
Hoses with banjo end fittings include new copper washers to help ensure proper sealing. Signs a brake hose may need replacing include cracking, bulging, fluid seepage, or a soft, spongy brake pedal.
What vehicles does this hose fit?
It's a direct-fit front-left brake hydraulic hose for the 2006-2011 Hyundai Azera and 2006-2010 Hyundai Sonata. Check the Buyer's Guide tab to confirm your vehicle.
What position is this hose for?
This hose is cataloged for the front-left position. Brake hoses are position-specific, so match it to the correct corner during installation.
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's hard line to the caliper, flexing with suspension and steering movement while holding hydraulic pressure.
What standards does this hose meet?
It's built to meet or exceed DOT, Federal Motor Vehicle Safety Standard FMVSS 106, and SAE J1401 requirements, and each hose is high-pressure tested at the factory.
Does it include copper washers?
Hoses with banjo end fittings include new copper washers to help ensure proper sealing. Mounting brackets, grommets, guards, wire clips, and sleeves are included as required.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
