Carry brake fluid to the front-right wheel with the Sunsong brake hose, part number 2201827A. It is a direct-fit replacement for the 2010-2011 Ford F-150 and the 2010-2012 Ford Lobo, designed by Sunsong for exact form, fit and function in the front-right position. See the "Vehicles it fits" section for engine-specific details.
A brake hydraulic hose is the flexible link that carries pressurized brake fluid from the vehicle's rigid brake line to the brake at the wheel. It flexes as the suspension and steering move. Sunsong is a vertically integrated manufacturer that researches, develops and builds automotive fluid transfer hoses and lines. It aims to exceed industry quality standards, not just meet them.
- Precision-engineered fit: Each hose is engineered to exact fit. Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required, so those wearable pieces are renewed along with the hose.
- Standards compliance: Meets or exceeds DOT, FMVSS 106 and SAE J1401 brake hose standards.
- Zinc-plated steel tubing: Sunsong makes its tubing from high-grade steel and electroplates it with zinc. The coating gives corrosion and rust resistance against high humidity, road salt, water and grime.
- Pressure tested: Every hose passes a high-pressure quality assurance test before it leaves the factory. Hoses with banjo end fittings include new copper washers for proper sealing.
Signs a brake hose may need replacing include a soft or spongy pedal, fluid seeping at the hose ends, or a hose that looks cracked, bulging or chafed. If a failed hose is the cause, this Sunsong unit replaces it. Bleed the brake system after installation as the vehicle's service information directs.
Interchange: 1474-424470
1474424470 · BH621461 · BHA621461 · H621461 · 777113 · AL3Z2078H · BRHF41
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What position does this Sunsong brake hydraulic hose fit?
It is cataloged for the front-right position on the 2010-2011 Ford F-150 and the 2010-2012 Ford Lobo. See the "Vehicles it fits" section for engine-specific details.
What standards does this brake hose meet?
Sunsong states that its brake hoses meet or exceed DOT requirements, FMVSS 106 and SAE J1401 standards.
What are signs a brake hose may need replacing?
Common signs include a soft or spongy pedal, brake fluid leaking at the hose, or a hose that looks cracked, swollen or chafed. Diagnose the brake system to confirm the cause before replacing parts.
Does it come with brackets or other hardware?
Brackets, grommets, molded plastic guards, wire clips and protective sleeves are included as required. Hoses with banjo end fittings come with new copper washers.
Is the tubing protected against corrosion?
Sunsong makes its tubing from high-grade steel and electroplates it with zinc. The coating resists corrosion and rust from high humidity, road salt, water and grime.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review