Sunsong 3404263 power steering hose for the 2006-2008 Infiniti M35 carries power steering fluid between the pump and the steering gear. The Sunsong power steering hose assembly covers both the pressure and the return hose.
- Pressure hose with a max working pressure of 1,500 psi
- Pressure hose with a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb
- High pressure quality assurance test on every pressure hose before it leaves the factory
- Includes the additional components needed to restore wearable parts to original condition
Quick facts
- Part: Sunsong 3404263 power steering hose
- Also called: power steering hose assembly
- Fits: 2006-2008 Infiniti M35
- Condition: New
A worn hose can show up as fluid seepage at a fitting, a damp, cracked or swollen hose, or a fluid level that keeps dropping. With the engine off and cool, look along both hoses and their fittings for wetness or cracks. A leak can also start at the pump, the steering rack or a loose fitting, so find where the fluid is coming from before you replace the hose.
Fits
It fits the 2006-2008 Infiniti M35, and each car takes one.
Specifications
- Quantity per vehicle: 1
- Type: pressure and return hose assembly
- Pressure hose max working pressure: 1,500 psi
- Pressure hose burst pressure: 8,700 psi
- Pressure hose tensile strength: 1,600 lb
- Condition: New
- Country of origin: Thailand
Installation notes
- The pressure and return hoses come pre-assembled with brackets, which means easier installation and less labor time than hoses sold individually.
Interchange: 13404263 · 49710EH100 · 49710EH10A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does Sunsong 3404263 fit a 2006-2008 Infiniti M35?
Yes. Sunsong 3404263 is listed for the 2006-2008 Infiniti M35, and each car takes one.
Where is this Sunsong hose made?
Sunsong 3404263 lists Thailand as its country of origin.
What pressure ratings do Sunsong power steering pressure hoses carry?
This pressure hose has a max working pressure of 1,500 psi, a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb.
Is the Sunsong power steering pressure line hose assembly one hose or a pressure and return set?
It is a pressure and return assembly. The hoses come pre-assembled with brackets, along with the additional components needed to restore wearable parts.
Does this hose cross-reference to 49710EH100?
Yes. 49710EH100 is listed as a number this hose replaces, as are 49710EH10A and 13404263.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review