Sunsong Power Steering Return Line Hose Assembly P/N:3403686
Replace a leaking or worn return hose with the Sunsong power steering return line hose assembly, part number 3401407. This return line runs from the steering gear and carries low-pressure power steering fluid back through the system. It is a direct-fit replacement for these vehicles: the 1980-1996 Ford Bronco, the 1980-1983 Ford F-100, the 1980-1987 and 1993-1996 Ford F-150 and Ford F-250, the 1980-1987 and 1993-1997 Ford F-350, the 1986-1987 Ford F-200, and the 1997 Ford F-250 HD. Sunsong is a vertically integrated maker of automotive fluid transfer hoses and lines, and it designs its assemblies to deliver exact form, fit, and function.
Specifications: End 1 is a 3/8 in. ID hose connection. End 2 is a 5/8 in. male inverted flare fitting. Overall length is 104.3 in. (2649 mm). A bracket and a switch port are not included. Engine: All. The listed applications use one per vehicle. Country of origin: Thailand.
These are signs that a return hose may need replacing: fluid seeping from the hose or its fittings, a reservoir level that keeps dropping, or a hose that is cracked, swollen, or hardened. If the return line is the source of the leak, this assembly replaces it.
Interchange: 36-370650 · 2647-272984 · 979-2026
36370650 · 2647272984 · 9792026 · 37065 · 91846 · E3TZ3A713F · F4TZ3A713F · 370650 · 76230 · 70086 · 13401407
This part cross-references / interchanges with the following part numbers:
Which vehicles does Sunsong 3401407 fit?
It is listed for the Ford Bronco (1980-1996), Ford F-100 (1980-1983), Ford F-150 and Ford F-250 (1980-1987, 1993-1996), Ford F-350 (1980-1987, 1993-1997), Ford F-200 (1986-1987) and Ford F-250 HD (1997).
What pressure is this return hose rated for?
Sunsong rates its return hoses for a maximum working pressure of 250 psi. They are intended for low-pressure, high-temperature operation on the return side of the system.
What fittings are on each end?
One end is a 3/8 in. ID hose connection and the other is a 5/8 in. male inverted flare fitting. The overall length is 104.3 in. (2649 mm).
Does it come with a bracket?
No. A bracket and a switch port are not included. Transfer or replace the original bracket as directed by the vehicle's service procedure.
What are signs the return line may need replacing?
Fluid seeping from the hose or fittings, a reservoir level that keeps dropping, or a cracked, swollen or hardened hose. Confirm the source of the leak before replacing the line.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.