Replace a worn front lower pivot with the Mevotech TTX ball joint, part number TXK90375. It is a direct-fit replacement for the 2001-2012 Hyundai Santa Fe and 2011-2013 Kia Sorento. In the front lower position, the ball joint links the control arm to the steering knuckle, so the wheel can pivot for steering while it travels with the suspension.
Mevotech builds its TTX™ line for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks. Its Labor Saver™ designs, tools and hardware are intended to make installation faster and easier.
- Maximum toughness: Patented sintered bearings are built for longer-lasting performance. An application-specific ball stud system uses a larger sphere.
- Locks out contaminants: A patented sealing ring permanently locks the boot onto the ball joint housing.
- Simple to service: A 90-degree SAE grease fitting is included for routine lubrication.
- Secure, snug fastening: Pre-applied nylok thread adhesive helps fasteners stay secure and resist vibration. Knurling gives a snugger fit between connecting points to help avoid distortion and corrosion. An application-specific pinch bolt and locking nut are provided.
Signs a ball joint may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear, and play at the wheel during inspection. Tie rods, bushings and other components can cause similar symptoms, so diagnose the cause first. If a worn front lower joint is the culprit, this Mevotech TTX suspension ball joint replaces it. See the "Vehicles it fits" section for engine-level fitment.
Frequently Asked Questions
What vehicles does TXK90375 fit?
It fits the 2001-2012 Hyundai Santa Fe and the 2011-2013 Kia Sorento in the front lower position. See the "Vehicles it fits" section for engine-level details.
Is this the right part for a 2011 Kia Sorento ball joint replacement?
Yes. The 2011 Kia Sorento is a listed application for this front lower ball joint, which comes with an application-specific pinch bolt and locking nut.
Does it come with installation hardware?
Yes. An application-specific pinch bolt and locking nut are provided, and pre-applied nylok thread adhesive helps keep the fasteners secure.
Can this ball joint be greased?
Yes. It includes a 90-degree SAE grease fitting, so the joint can be lubricated during routine service.
How is the boot held in place?
A patented sealing ring permanently locks the boot onto the ball joint housing, designed to keep contaminants out of the joint.
