Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS901316
Mevotech Supreme CMS101288 front left lower control arm with ball joint for the 2024 Mercedes-Benz S500 and other vehicles connects the steering knuckle to the vehicle. Sold as a control arm and ball joint assembly, this Mevotech Supreme suspension control arm replaces the arm and joint as one unit, with rubber bushings included.
A clunk over bumps, steering that wanders or uneven front tire wear can mean a worn control arm or ball joint. Worn sway bar links, tie rod ends or a tired strut can be behind those signs too, so find the cause before you buy. If this arm is the cause, this assembly replaces it.
Besides the 2024 Mercedes-Benz S500, it fits the 2009-2014 Mercedes-Benz CL550 and the 2012-2013 Mercedes-Benz S350. This listing is one arm for the front left lower forward position, which takes one per car; the other side is ordered separately, and the pair is normally replaced together. For another Mercedes-Benz, find your year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint and rubber bushings.
Interchange: 524-527
19356703 · TC7863 · CB27063 · CB27063PR · 5CB10512 · 2213303711 · 2213306511 · A2213303711 · A2213306511 · GS101288 · 2608135 · 30036253 · X31CJ2524
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme CMS101288 fit the 2009-2014 Mercedes-Benz CL550?
Yes. Mevotech Supreme CMS101288 fits the 2009-2014 Mercedes-Benz CL550 as the front left lower forward arm, and this side takes one. For other cars, use the "Vehicles it fits" section.
Is this Mevotech Supreme lower control arm right for the 2012-2013 Mercedes-Benz S350?
Yes. Mevotech Supreme CMS101288 fits the 2012-2013 Mercedes-Benz S350 at the front left lower forward position. The other side is a separate part ordered on its own.
Does this control arm come with bushings and a locking nut?
Yes. This control arm includes rubber bushings, and a part-specific nylon locking nut is provided for the ball joint.
How big is the CMS101288 control arm?
This control arm's maximum length is 21.0 inches and its maximum width is 17.0 inches. The ball joint stud is threaded, and the arm is not adjustable.
Does Mevotech Supreme CMS101288 replace the number 2213303711?
Yes. 2213303711 is one of the numbers Mevotech Supreme CMS101288 replaces; the full list is on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.