Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS86142
Mevotech Supreme CMS101289 front right lower control arm with ball joint for the 2024 Mercedes-Benz S500 and other vehicles links the wheel to the chassis. Sold as a control arm and ball joint assembly, this Mevotech Supreme suspension control arm comes with its ball joint attached.
A clunk over bumps, uneven tire wear or a pull to one side can come from a worn control arm, ball joint or bushing, though worn parts elsewhere in the suspension can feel the same. With the car parked and the engine off, look at the visible rubber bushings and ball joint boot for cracks, tears or leaking grease; a shop can check play, which needs the car lifted.
The 2024 Mercedes-Benz S500, the 2009-2014 Mercedes-Benz CL550 and the 2012-2013 Mercedes-Benz S350 are among the vehicles this control arm fits. This listing is one arm for the front right lower forward position; the left side is a separate part, and the two sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, and one nylon locking nut.
Interchange: 524-528
19340481 · SD49655 · TC7832 · CB27064 · CB27064PR · 5CB10510 · RK622447 · 2213303811 · 2213306611 · A2213303811 · A2213306611 · GS101289 · 2608136 · 30036254 · X31CJ2523
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme CMS101289 fit the 2009-2014 Mercedes-Benz CL550?
Yes. Mevotech Supreme CMS101289 is the front right lower forward arm for the 2009-2014 Mercedes-Benz CL550. For any other car, open the "Vehicles it fits" section and look up your own year and model there.
Is the ball joint on this Mevotech Supreme lower control arm pre-greased?
Yes. The ball joint comes pre-greased and has a threaded stud, and the arm includes rubber bushings.
Does the Mevotech Supreme control arm come with a nut for the ball joint?
Yes. One part-specific nylon locking nut is supplied for the ball joint, and it is meant to speed up installation.
How can I tell if a control arm bushing is worn?
Cracked or split rubber on the bushings or a torn ball joint boot can show wear, and a clunk over bumps can be another sign. Looseness inside the ball joint itself is best measured by a shop on a lifted car.
Is this control arm made of steel?
Yes. Mevotech Supreme CMS101289 has a steel control arm with rubber bushings. Its maximum length is 21.0 in and its maximum width is 17.0 in.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.