Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS90110
Mevotech Supreme CMS101313 rear left upper control arm with ball joint for the 2007-2012 BMW X5 and other vehicles locates the rear left wheel and pivots on its ball joint. This control arm and ball joint assembly replaces the arm, ball joint and bushings as one unit.
A clunk over bumps, uneven tire wear or vague steering can mean a worn ball joint or bushings, though other suspension parts can make similar noises. With the engine off, look for a cracked arm or split bushing rubber first, and leave ball joint play checks to a shop.
It is a direct-fit replacement control arm for the 2007-2012 BMW X5 and the 2008-2012 BMW X6, and each takes one at this rear left position. This listing is one arm; the rear right is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, rubber bushings and a locking nut.
Interchange: 101-7015 · 102-7015 · 622.34021 · 521-587
19328303 · 33326770969 · TC3011 · 6CB10514 · GS101313 · 2608137 · 30036276 · X05LA1075
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the control arm bushing for the 2007-2012 BMW X5 included with this arm?
Yes. Mevotech Supreme CMS101313 includes rubber bushings, so the arm, ball joint and bushings come together as one assembly.
Will the Mevotech Supreme CMS101313 fit the 2008-2012 BMW X6?
Yes. It is a rear left upper control arm for the 2008-2012 BMW X6, and each takes one at this position. The right side is ordered separately.
Does the Mevotech Supreme control arm have rust protection?
Yes, on the ball joint: it has an additional surface treatment that prevents rust build-up, which is meant to give it a longer service life.
What comes with this Mevotech Supreme suspension control arm to help with installation?
It comes with a part-specific locking nut for the ball joint stud, and the ball joint is pre-greased.
How long and wide is this rear control arm with ball joint?
Maximum length is 16.0 inches and maximum width is 2.78 inches. The ball joint has a threaded stud.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.