Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20419
Mevotech Supreme CMS10174 front left lower control arm with ball joint for the 2003-2011 Saab 9-3 and other vehicles links the wheel to the chassis. Its ball joint lets the steering knuckle pivot as the suspension moves.
Clunking over bumps, loose steering or uneven front tire wear can mean a worn arm bushing or ball joint, though other suspension parts cause the same signs. With the engine off, look over the arm, bushings and ball joint for cracks, tears or rust, and have a shop test the joint for play before you replace anything.
This is a control arm for the 2003-2011 Saab 9-3 and the 2010-2011 Saab 9-3X. This listing is one arm for the front left, which takes one; the front right is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, with its bushings and mounting hardware.
Interchange: 101-6157 · 102-6157 · 622.38001 · 520-551 · 616 050 0001
19291523 · SAH101 · TC2075 · CB36023 · CB36023PR · CA12378 · CAK620570 · K620570 · RK620570 · 30036452 · 5071435 · SK520551 · SK620570 · 12783755 · 12796013 · 12799199 · X37CJ3196 · JTC1001 · TK620570
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Mevotech Supreme control arm right for the 2010-2011 Saab 9-3X?
Yes. Mevotech Supreme CMS10174 fits the 2010-2011 Saab 9-3X and the 2003-2011 Saab 9-3, in the front left lower position.
Does the Mevotech Supreme lower control arm come with bushings and mounting hardware?
Yes. Mevotech Supreme CMS10174 includes its rubber bushings and mounting hardware, and the assembly is pre-greased.
What is the Mevotech Supreme suspension control arm made of?
The arm is steel and the bushings are rubber. A protective surface treatment helps resist rust build-up.
How can I tell if a front left lower control arm is worn?
Clunking over bumps, loose steering or uneven front tire wear can come from a worn bushing or ball joint, though other suspension parts cause these too. Cracked or torn rubber is visible with the engine off.
Is a control arm and ball joint assembly the same as this CMS10174 arm?
Yes. CMS10174 is a control arm with the ball joint built in, for the front left lower position. The right side is a separate part.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.