Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20372
Mevotech Supreme CMS20334 front left lower control arm with ball joint for the 1977-1985 Chevrolet Impala and other vehicles links the wheel assembly to the frame and gives it a pivot. Sold as a control arm and ball joint assembly, this Mevotech Supreme suspension control arm is built for high-usage commercial and passenger vehicles and working trucks.
A worn arm or ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven tire wear. These signs alone do not prove this part is at fault, since a worn tie rod end can also cause loose steering. This listing is one front left arm; the front right is a separate part, and the pair is normally replaced together.
The 1977-1985 Chevrolet Impala, the 1980-1981 Chevrolet Camaro, the 1992-1996 Cadillac Commercial Chassis and many more fit this front left lower arm, and each takes one.
Fit and size
Build and materials
One control arm with ball joint and its mounting hardware.
Interchange: 622.62047 · 622.62802 · 520-117
19289927 · TGS20334 · 10232819 · 10232815 · TC6553 · CB91073 · CB91073PR · CA16043 · FCA760 · CAK620168 · IK620168 · K620168 · RK620168 · C7GS20334 · GS20334 · 2605533 · 143302 · 30034107 · 9CB50033 · 11348 · 5071324
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Camaro control arm fit the 1980-1981 Chevrolet Camaro?
Yes. Mevotech Supreme CMS20334 is a front left lower control arm with ball joint for the 1980-1981 Chevrolet Camaro, one per car on that side. Check your own car in the "Vehicles it fits" section.
Is this the right Chevy Impala control arm for a 1977-1985 Chevrolet Impala?
Yes, this front left lower arm fits the 1977-1985 Chevrolet Impala. The right side takes its own separate control arm.
Does the Mevotech Supreme CMS20334 control arm include its mounting hardware?
Yes. Mevotech Supreme CMS20334 comes with all essential mounting hardware and an SAE grease fitting for servicing the joint.
What are the maximum length and width of this front left lower control arm?
The control arm measures up to 19.0 in long and 16.0 in wide at its maximum.
Is this Mevotech Supreme control arm greaseable?
Yes. The arm is greaseable and arrives pre-greased, so the included SAE grease fitting is there for later servicing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.