Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK9063
Mevotech Supreme CMS20378 front left lower control arm with ball joint for the 1994-1999 Dodge Ram 2500 and other vehicles links the front left wheel to the chassis and carries the ball joint. Sold as a control arm and ball joint assembly, it replaces the arm and the joint in one piece.
Clunking over bumps, loose-feeling steering or uneven tire wear can mean a worn control arm or ball joint. Before you replace this arm, rule out worn tie rod ends, tired shocks and a loose wheel bearing, since they can produce similar noises and looseness. The front axle has one arm on each side. This listing is the front left, so the front right is ordered separately, and the two are normally replaced together.
It fits the 1994-1999 Dodge Ram 2500 and the 1994-1999 Dodge Ram 3500.
Fit and size
Build and materials
One control arm with the ball joint and bushings installed, plus a castle nut and a cotter pin.
Interchange: 520-331
19290339 · VGS20378 · 52037649 · CB81253 · CB81253PR · CA18019 · CAK620482 · RK620482 · C9GS20378 · GS20378 · 2605575 · 187302 · 30034139 · 11CB25035 · 11695 · RP11695 · 5071348 · JTC2360
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the control arms for the 1994-1999 Dodge Ram 2500?
Yes. Mevotech Supreme CMS20378 is a front left lower control arm with ball joint for the 1994-1999 Dodge Ram 2500. The front right side is a separate part.
Is CMS20378 one of the control arms for the 1994-1999 Dodge Ram 3500?
Yes. Mevotech Supreme CMS20378 also fits the 1994-1999 Dodge Ram 3500, in the front left lower position.
Does this Mevotech Supreme suspension control arm come with a castle nut and cotter pin?
Yes. A castle nut and cotter pin come with it to secure the ball joint, and the rubber bushings are already installed in the arm.
Is the ball joint on this arm pre-greased?
Yes. The ball joint is pre-greased. It is a press-in type with a threaded stud, and the arm itself is steel with a protective surface treatment.
How can I tell if a front lower control arm is worn?
Clunking over bumps, loose-feeling steering and uneven tire wear can be signs of a worn control arm or ball joint. A shop can check the joint for play and the bushings for cracks.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.