Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501120
Mevotech Supreme CMS20379 front right lower control arm with ball joint for the 1994-1999 Dodge Ram 2500 and other vehicles links the right front wheel to the frame and lets the suspension move. It is sold as a control arm and ball joint assembly.
This Mevotech Supreme control arm is built for high-usage commercial and passenger vehicles, fleets and working trucks. A clunk over bumps, uneven tire wear or loose steering can mean a worn lower control arm or ball joint. These signs alone do not prove this arm is the problem; a worn tie rod end can cause similar looseness. This listing is one arm for the front right, with one on each side of the axle, so the front left is a separate part and both sides are normally replaced together.
It fits the 1994-1999 Dodge Ram 2500 and the 1994-1999 Dodge Ram 3500.
Fit and size
Build and materials
One control arm with its ball joint, bushings and mounting hardware.
Interchange: 520-332
19290340 · VGS20379 · 52037648 · CB81254 · CB81254PR · CA18018 · CAK620483 · RK620483 · C9GS20379 · GS20379 · 2605576 · 197302 · 30034140 · 11CB25036 · 11696 · 5071349 · JTC2359
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this front right lower arm among the 1994-1999 Dodge Ram 2500 control arms that fit?
Yes. Mevotech Supreme CMS20379 is a front right lower control arm with ball joint for the 1994-1999 Dodge Ram 2500, and the front left side is a separate part.
Is this one of the 1994-1999 Dodge Ram 3500 control arms?
Yes. The 1994-1999 Dodge Ram 3500 takes this arm at the front right lower position, with one on each side of the axle.
Is this Mevotech Supreme suspension control arm sold with bushings and a castle nut?
Yes. Mevotech Supreme CMS20379 includes rubber bushings and mounting hardware, plus a part-specific castle nut and cotter pin to secure the ball joint.
Is the ball joint on this front right control arm pre-greased?
Yes. This arm's ball joint is pre-greased, mounts by press in and has a threaded stud.
How can I tell if a front lower control arm is wearing out?
A clunk over bumps, uneven tire wear or steering wander can be signs. Cracked or split rubber bushings or a torn ball joint boot may show with the vehicle parked, and a shop can check ball joint play.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.