Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK9063
Mevotech Supreme CMS20380 front left upper control arm with ball joint for the 1998-2003 Dodge Ram 1500 Van and other vehicles locates the front left wheel and lets it pivot on the ball joint. Also called a control arm and ball joint assembly, this Mevotech Supreme suspension control arm combines the arm, ball joint and bushings in one unit.
Uneven tire wear, a clunk over bumps or loose steering can point to a worn ball joint or bushings. Tie rod ends, shocks and wheel bearings can be behind these signs too, so find the cause before buying. This listing is one arm for the front left; the front right is a separate part, and both sides are normally replaced together. The 1998-2003 Dodge Ram 1500 Van takes one on this side.
The 1998-2003 Dodge Ram 1500 Van, 1998-2003 Dodge Ram 2500 Van and 1998-2003 Dodge Ram 3500 Van take this arm, and so do many other vehicles. If your vehicle isn't named here, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint, bushings and mounting hardware.
Interchange: 622.67020 · 520-315
19289807 · TC7681 · 4210873AD · CB81157 · CB81157PR · CA12238 · CA12244 · FCA820 · FCA825 · CAK620315 · CK620369 · RK620315 · 30034141 · 5021104 · SRK620315
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Mevotech Supreme CMS20380 fit a 1998-2003 Dodge Ram 2500 Van?
Yes, Mevotech Supreme CMS20380 fits the 1998-2003 Dodge Ram 2500 Van at the front left upper position, and the 1998-2003 Dodge Ram 3500 Van too. Other years and models are in the "Vehicles it fits" section.
Does this Mevotech Supreme control arm come with bushings?
Yes. Rubber bushings are included with this control arm, along with mounting hardware.
What is the CMS20380 arm made of, and is it protected from rust?
The Mevotech Supreme CMS20380 arm is steel with rubber bushings. A protective surface treatment helps resist rust build-up.
What are signs the ball joint on a front left upper control arm is wearing out?
Signs can include a clunk over bumps, uneven tire wear or loose steering. Checking ball joint play needs the vehicle raised, so a shop can test it safely.
Is a nut included for the ball joint stud on the CMS20380?
Yes. The CMS20380 comes with a part-specific castle nut to secure the threaded ball joint stud, and its ball joint is pre-greased.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.