Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS90111
Mevotech Supreme CMS251001 front left lower control arm with ball joint for the 2008-2020 Dodge Grand Caravan and other vehicles holds the wheel in position as the suspension moves. This Mevotech Supreme suspension control arm is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
A clunk over bumps, uneven tire wear or a loose feel in the steering can mean a worn bushing or ball joint. Before replacing the arm, have the cause found; a shop can check the ball joint and bushings for play. If this arm is the cause, this assembly replaces the arm, ball joint and bushings in one piece. This listing is one arm for the front left; the front right is a separate part, and both sides are normally replaced together.
The 2008-2020 Dodge Grand Caravan, the 2008-2016 Chrysler Town & Country and the 2012-2015 Ram C/V take this control arm, and it fits more vehicles; each takes one for the front left. If your vehicle is not named here, look it up in the "Vehicles it fits" section. The stamped steel arm is built to OE specifications or better.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, 180 degree SAE grease fitting, mounting hardware and a part-specific nylon locking nut.
Product information is for general reference and may contain errors. See our Disclaimer.
Will this C/V control arm fit the 2012-2015 Ram C/V?
Yes. Mevotech Supreme CMS251001 fits the 2012-2015 Ram C/V as the front left lower arm with ball joint. The front right side is a separate part.
Is this Dodge Grand Caravan control arm for the 2008-2020 model years the front left lower one?
Yes. This arm goes on the front left lower position of the 2008-2020 Dodge Grand Caravan, and each vehicle takes one for that side.
Does this control arm and ball joint assembly come with bushings and a grease fitting?
Yes. Mevotech Supreme CMS251001 includes the bushings, ball joint, dust boot, 180 degree SAE grease fitting and mounting hardware, plus a nylon locking nut for the ball joint.
What are the bushings and bearing on this Mevotech Supreme lower control arm made of?
The bushings are rubber and the arm itself is steel. The bearing is sintered metal and the dust boot is neoprene.
How can I tell if the ball joint or bushings on this front left arm are worn?
Cracked or separated bushing rubber, a torn dust boot or a clunk over bumps can mean wear. A shop can test ball joint play and inspect the bushings.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.