Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS86142
Mevotech Supreme CMS25110 front left lower control arm with ball joint for the 2000-2004 Dodge Dakota and other vehicles links the wheel to the frame and pivots on its ball joint. Sold as a control arm and ball joint assembly, this Mevotech Supreme control arm is made for the front left lower position.
A clunk over bumps, uneven tire wear or loose steering can mean a worn ball joint or bushing. These signs alone do not prove the arm is at fault, since a worn tie rod end can cause them too. Replace the front lower arms as a pair; this listing is one arm, for the front left.
It fits the 2000-2004 Dodge Dakota and the 2000-2003 Dodge Durango.
Fit and size
Build and materials
One control arm with ball joint and bushings, plus a castle nut and cotter pin. This listing is one arm; the front left takes one, and the front right is ordered separately.
Interchange: 622.67038 · 520-305
19290311 · TC5948 · 52106397AA · CB81173 · CB81173PR · CA16111 · FCA810 · CAK620477 · CK620477 · K620477 · RK620477 · 30034218 · 12148 · RP12148 · JTC2342 · CP5010 · TK620477
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this front left lower arm work as a control arm for the 2000-2003 Dodge Durango?
Yes. Mevotech Supreme CMS25110 fits the 2000-2003 Dodge Durango in the front left lower position, and it is one arm per listing.
Can I use this control arm on the front left of a 2000-2004 Dodge Dakota?
Yes. Mevotech Supreme CMS25110 is the front left lower arm for the 2000-2004 Dodge Dakota; the front right is a separate part.
Does the Mevotech Supreme suspension control arm come with a castle nut and cotter pin?
Yes. The ball joint secures with the part-specific castle nut and cotter pin provided, and the rubber bushings are included with the arm.
Is this control arm with ball joint pre-greased?
Yes. This assembly is listed as pre-greased. Its ball joint stud is threaded and its bushings are rubber.
What are the maximum length and width of the CMS25110 control arm?
The maximum length is 17.0 inches and the maximum width is 19.0 inches. The arm is steel with a protective surface treatment.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.