Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS901316
Mevotech Supreme CMS251164 front left lower control arm with ball joint for the 2013-2023 Dodge Charger and other vehicles locates the wheel and lets the suspension move. Sold as a control arm and ball joint assembly, it has rubber bushings and a dust boot.
A worn arm or ball joint can show up as a clunk over bumps, loose or wandering steering or uneven front tire wear. These signs alone do not prove this arm is the problem, since a worn sway bar link is another common source of a clunk.
It fits as a 2013-2023 Dodge Charger lower control arm and as a 2017-2023 Dodge Challenger control arm, and it also fits the 2012-2023 Chrysler 300. This listing is one arm for the front left; the front right arm on that axle is ordered separately and is normally replaced at the same time.
Fit and size
Build and materials
One front left control arm with ball joint and mounting hardware. This listing holds one arm, and the front left position takes one.
Interchange: 622.63048 · 524-053
19383201 · 5168283AA · 5168283AB · TC6011 · 05168283AB · 68211103AA · 68211103AB · CA12604 · RK622525 · 2608478 · 30034250 · 9CB25340 · X13CJ0721
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Can I use this as a 2013-2023 Dodge Charger control arm?
Yes. Mevotech Supreme CMS251164 fits the 2013-2023 Dodge Charger in the front left lower position. The front right arm is a separate part.
Does this Chrysler 300 control arm cover the 2012-2023 model years?
Yes. Mevotech Supreme CMS251164 fits the 2012-2023 Chrysler 300 as the front left lower arm, so the right side needs its own.
Does the CMS251164 include the nylon locking nut and grease fitting?
Yes. Mevotech Supreme CMS251164 comes with a part-specific nylon locking nut for the ball joint and a 135 degree SAE grease fitting, plus bushings, dust boot and mounting hardware.
What are the bushings and bearing in this control arm with ball joint made of?
The bushings are rubber and the bearing is sintered metal. The arm is steel with a protective surface treatment, and the dust boot is rubber.
What does a worn front left lower control arm feel like?
A clunk over bumps, loose steering or uneven front tire wear can be signs of a worn arm or ball joint. A shop can inspect the front suspension if you notice any of them.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.