Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20419
Mevotech Supreme CMS25136 front right upper control arm with ball joint for the 1998-2003 Dodge Ram 1500 Van and other vehicles links the wheel to the chassis. This Mevotech Supreme suspension control arm, also called a control arm and ball joint assembly, includes rubber bushings.
A clunk over bumps, loose steering or uneven tire wear can mean the ball joint or bushings are worn. Before you replace this control arm, rule out a loose tie rod end, a worn shock or a bad wheel bearing.
This front right upper control arm fits the 1998-2003 Dodge Ram 1500 Van, the 1998-2003 Dodge Ram 2500 Van and the 1998-2003 Dodge Ram 3500 Van. This listing is one control arm, and a 1998-2003 Dodge Ram 3500 Van takes one at this position; the front left upper control arm is a separate part, and that axle's pair is normally replaced together. If your Dodge is not one of these, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint, its bushings, a slotted castle nut, a snap cotter pin and a grease fitting.
Interchange: 622.67050 · 623.67021 · 623.67050 · 520-318
19288723 · 4210876 · 4210876AB · 4210876AE · TC7685 · 4210872 · 5134386AA · CB81168 · CB81168PR · CA12237 · CAK620370 · ICA520318 · K620370 · RK620370 · 30034311 · 8CB25067 · 5021107
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Mevotech Supreme CMS25136 front right upper control arm with ball joint fit the 1998-2003 Dodge Ram 1500 Van?
Yes. The Mevotech Supreme CMS25136 is made for the front right upper position on the 1998-2003 Dodge Ram 1500 Van. If your van is a different year or model, look it up in the "Vehicles it fits" section.
Does this control arm with ball joint come with a castle nut and cotter pin?
Yes. It includes a part-specific slotted castle nut and a snap cotter pin, plus the bushings and a 180 degree SAE grease fitting.
Is this Mevotech Supreme control arm greaseable?
Yes. The Mevotech Supreme CMS25136 comes pre-greased and has a 180 degree SAE grease fitting for servicing.
What is the bearing in this control arm made of?
The bearing is sintered metal. The control arm itself is steel, and the bushings are rubber.
Can I use this control arm in place of part number 4210876?
Yes. 4210876 is one of the numbers the Mevotech Supreme CMS25136 replaces, along with 520-318 and 5134386AA.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.