Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501120
Mevotech Supreme CMS25143 front right lower control arm with ball joint for the 2005-2010 Dodge Dakota and other vehicles links the front right wheel to the frame and gives the suspension its pivot point. Each Mevotech Supreme control arm is built for high-usage commercial and passenger use, including fleets and working trucks.
A worn lower arm or ball joint can show up as clunking over bumps, a wandering or pulling feel, or uneven front tire wear. These signs alone do not prove this arm is the problem, since a worn tie rod end can cause similar symptoms. This listing is one arm for the front right, and the 2005-2010 Dodge Dakota takes one on that side; the front left is a separate part ordered separately, and the two are normally replaced together.
It is a direct-fit replacement control arm for the 2005-2010 Dodge Dakota, the 2011 Ram Dakota and the 2006-2009 Mitsubishi Raider.
Fit and size
Build and materials
One control arm with ball joint, rubber bushings and mounting hardware.
Interchange: 101-7044 · 102-7044 · 622.67023 · 521-148
19290034 · 52855106AA · 52855106AB · TC5990 · CB81064 · CB81064PR · CA12409 · CAK620479 · K620479 · RK620479 · FA4956 · 30030739 · 5CB25083 · 5071534 · SRK620479 · X13CJ0577 · JTC2337 · CP5011 · TK620479
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the lower control arm for the 2005-2010 Dodge Dakota?
Yes. Mevotech Supreme CMS25143 is the front right lower control arm with ball joint for the 2005-2010 Dodge Dakota. The front left side is a separate part.
Does this control arm and ball joint assembly come with a locking nut and bushings?
Yes. Mevotech Supreme CMS25143 includes a part-specific nylon locking nut, rubber bushings, mounting hardware and a 90 degree SAE grease fitting.
How does the ball joint mount on this Mevotech Supreme suspension control arm?
The ball joint mounting type is press in, and its stud is threaded. The bearing material is sintered metal.
What can a worn lower control arm sound like?
A worn lower arm or ball joint can cause clunking over bumps or a wandering feel. A shop can check ball joint play and the bushings.
Can the ball joint on this control arm be greased?
Yes. The ball joint is pre-greased and greaseable, and the 90 degree SAE grease fitting supplied with it makes later servicing simple.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.