Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK9063
Mevotech Supreme CMS25146 front upper control arm with ball joint for the 2000-2002 Dodge Ram 2500 and other vehicles links the wheel to the frame and pivots on its ball joint. This control arm and ball joint assembly suits high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
Worn bushings or a worn ball joint can show up as clunking over bumps, loose steering or uneven tire wear. Other suspension parts can produce similar signs, so with the engine off and cool, look the arm and bushings over for cracked rubber, bends or heavy rust first, and leave play checks to a shop.
A Ram 1500 control arm for the 2000-2001 Dodge Ram 1500, it also fits the 2000-2002 Dodge Ram 2500 and the 2000-2002 Dodge Ram 3500. The 2000-2002 Dodge Ram 2500 takes two. This listing is one arm; the other side of the front axle is normally done at the same time.
Fit and size
Build and materials
One control arm with ball joint, bushings, mounting hardware, a part-specific castle nut and cotter pin, and a 90 degree SAE grease fitting.
Interchange: 622.67003 · 521-882
19291096 · PGS25146 · 52106678AA · TC5940 · CB82005 · CB82005PR · CB96559 · CB96559PR · CAK621854 · RK621854 · GS25146 · 2606244 · 2606244M · 164152 · 30034316 · 8CB25086 · 5021286 · X13CJ0907 · JTC2675
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Mevotech Supreme CMS25146 a Ram 1500 upper control arm for the 2000-2001 Dodge Ram 1500?
Yes. Mevotech Supreme CMS25146 is a front upper control arm with ball joint that fits the 2000-2001 Dodge Ram 1500.
Does the Mevotech Supreme control arm work on the 2000-2002 Dodge Ram 3500?
Yes. Mevotech Supreme CMS25146 fits the 2000-2002 Dodge Ram 3500 as a front upper control arm with ball joint.
What hardware comes with this front upper control arm?
It comes with mounting hardware, bushings, a part-specific castle nut and cotter pin, and a 90 degree SAE grease fitting. No other parts are listed in the box.
Can this control arm be greased after installation?
Yes. The ball joint comes pre-greased and is greaseable, and the included 90 degree SAE grease fitting makes later servicing simpler.
What holds the ball joint in place on the CMS25146?
The part-specific castle nut and cotter pin supplied with Mevotech Supreme CMS25146 secure the ball joint to the vehicle.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.