Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS90110
Mevotech Supreme CMS25192 front left lower control arm with ball joint for the 2003-2004 Dodge Ram 2500 and other vehicles connects the front left wheel to the frame and holds the ball joint that lets the wheel pivot. Sold as a control arm and ball joint assembly, it replaces the arm and its ball joint together.
Clunking over bumps, loose or wandering steering, or uneven front tire wear can mean this arm or its ball joint is worn, though worn tie rod ends or a worn wheel bearing can be behind the same signs, so find the cause before replacing anything.
This is a direct-fit replacement for the 2003-2004 Dodge Ram 2500 and the 2003-2004 Dodge Ram 3500. A 2003-2004 Dodge Ram 2500 takes one arm at this position. The listing is a single arm, so the front right is a separate part, ordered separately, and the two sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, bushings, mounting hardware, a part-specific locking nut and an extended 180 SAE grease fitting.
Interchange: 19297860 · TC6355 · 52106767AC · 52106767AE · 52106767AH · GS25192 · 2606573 · 30034358 · 12CB25124 · 5071986 · JTC2354
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Are these Ram 2500 control arms a match for the 2003-2004 Dodge Ram 2500?
Yes. Mevotech Supreme CMS25192 fits the 2003-2004 Dodge Ram 2500 at the front left lower position, and the truck takes one arm on that side.
Is this one of the Ram 3500 control arms for the 2003-2004 Dodge Ram 3500?
Yes. Mevotech Supreme CMS25192 also fits the 2003-2004 Dodge Ram 3500 at the front left lower position. The front right side is a separate part.
Does this Mevotech Supreme suspension control arm include a grease fitting and mounting hardware?
Yes. It comes with an extended 180 SAE grease fitting, mounting hardware, bushings and a part-specific locking nut, and the joint is pre-greased.
What are the bushings and bearing made of in this control arm?
The bushings are rubber and the bearing is sintered metal. The arm itself is steel.
Does Mevotech Supreme CMS25192 interchange with 52106767AC?
Yes. 52106767AC is one of the numbers this arm replaces, along with 52106767AE and 52106767AH.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.