Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS86142
Mevotech Supreme CMS25193 front right lower control arm with ball joint for the 2003-2004 Dodge Ram 2500 and other vehicles links the front suspension to the frame and holds the ball joint. This control arm and ball joint assembly is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
A clunk over bumps, uneven front tire wear or loose steering can mean the lower control arm or its ball joint is worn. These signs alone do not prove this arm is the problem; a worn tie rod end can feel much the same.
This listing is one front right lower arm, and the 2003-2004 Dodge Ram 2500 and the 2003-2004 Dodge Ram 3500 each take one on that side. The front left is a separate part, and the two sides are normally replaced together.
Fit and size
Build and materials
One front right lower control arm with ball joint, bushings, mounting hardware, an extended 180 SAE grease fitting and a part-specific locking nut.
Interchange: 19306946 · TC6354 · 52106766AC · 52106766AE · 52106766AH · RK621264 · GS25193 · 2606572 · 30034359 · 11CB25125 · 5071985 · JTC2355
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the control arms for the 2003-2004 Dodge Ram 2500, and which side is it?
Yes. Mevotech Supreme CMS25193 is the front right lower control arm with ball joint for the 2003-2004 Dodge Ram 2500. The front left side is a separate part.
Does Mevotech Supreme CMS25193 work as a control arm for the 2003-2004 Dodge Ram 3500?
Yes. The 2003-2004 Dodge Ram 3500 takes one of these on the front right. The front left is ordered separately.
What hardware comes with the Mevotech Supreme suspension control arm?
CMS25193 includes bushings, mounting hardware, an extended 180 SAE grease fitting and a part-specific locking nut for the ball joint, all with the arm.
Is the ball joint on this control arm greaseable?
Yes. The ball joint is pre-greased, and the included extended 180 SAE grease fitting lets you add grease later. It uses a sintered metal bearing.
What can I see on a worn front right lower control arm?
With the engine off, cracked or split rubber bushings, heavy rust or a bent arm can show. Ball joint play needs the vehicle lifted, so a shop can test that.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.