Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK9119
Mevotech Supreme CMS301115 front left upper control arm with ball joint for the 2014-2017 Infiniti QX70 and other vehicles connects the steering knuckle to the frame. The Mevotech Supreme suspension control arm is a control arm and ball joint assembly.
A worn control arm or ball joint can bring a clunk over bumps, loose steering or uneven tire wear. These signs alone do not prove this arm is the problem; a worn tie rod end can feel much the same. The front upper arms are normally replaced together, and this listing is one arm for the front left; the front right is a separate part.
The 2014-2017 Infiniti QX70, the 2013 Infiniti FX37 and the 2009-2013 Infiniti FX50 all fit this arm, as do other vehicles, with one arm per front left upper position. Its forged aluminum build meets or exceeds OE specifications. If your Infiniti is not named here, look for its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One front left upper control arm with ball joint and rubber bushings.
Interchange: 102-7686 · 522-853
19327282 · TC7386 · CA8766 · 545251CA0A · 4CB30331 · RK622198 · GS301115 · 2607307 · 30030413 · X58CJ0841
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does CMS301115 fit the front left side of the 2014-2017 Infiniti QX70?
Yes. Mevotech Supreme CMS301115 is the front left upper control arm for the 2014-2017 Infiniti QX70, and the front right takes a separate part.
Does this front left upper control arm come with the ball joint and bushings?
Yes. The ball joint is part of the assembly, and rubber bushings are included.
Is the CMS301115 arm aluminum or steel?
Aluminum. Mevotech Supreme CMS301115 has an aluminum control arm with rubber bushings, and its ball joint is a press-in type with a grooved stud.
Can a clunk over bumps come from the ball joint on an upper control arm?
Yes, a worn ball joint or bushing can cause a clunk over bumps, loose steering or uneven tire wear. A shop can test for play, and a worn suspension part should be dealt with promptly.
Does the ball joint on this control arm need greasing before installation?
No. The ball joint on Mevotech Supreme CMS301115 comes pre-greased.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.