Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20372
Mevotech Supreme CMS301188 front right lower control arm with ball joint for the 2006-2010 Infiniti M35 and other vehicles joins the front right wheel to the chassis and lets it move with the suspension. This Mevotech Supreme suspension control arm is sold as a control arm and ball joint assembly, with its rubber bushings included.
A clunk over bumps, loose steering feel or uneven front tire wear can mean this arm's ball joint or bushings are worn, though a worn tie rod end or strut mount can be behind them too. The front axle takes one lower arm on each side.
It is a direct-fit replacement control arm for the 2006-2010 Infiniti M35 and the 2006-2010 Infiniti M45, and it meets or exceeds OE specifications. This listing is one arm for the front right; the front left is a separate part, and that axle's pair is normally done at the same time.
Fit and size
Build and materials
One front right lower control arm with ball joint and rubber bushings, plus a castle nut and cotter pin.
Interchange: 102-7721 · 522-552
19356834 · TGS301188 · TC7310 · CB61114 · CB61114PR · CA12640 · 54500EG003 · 54500EG00B · 54500EG01A · 54500EG01B · 9CB30429 · RK622548 · C7GS301188 · GS301188 · 2607355 · 1881103 · 54500EG00A · 54500EG01C · 30031137
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a lower control arm for a 2006 Infiniti M35?
Yes. Mevotech Supreme CMS301188 fits the 2006-2010 Infiniti M35 as the front right lower arm; the left side is a separate part.
Does this Mevotech Supreme control arm come with bushings and a castle nut?
Yes. The rubber bushings are included, and a part-specific castle nut and cotter pin come with it for securing the ball joint.
What is the Mevotech Supreme CMS301188 arm made of?
Mevotech Supreme CMS301188 has an aluminum control arm with rubber bushings, and its ball joint stud is threaded.
How can I tell if the ball joint or bushings on a front lower control arm are worn?
A clunk over bumps or uneven front tire wear can point to worn parts here. A shop can measure ball joint play and inspect the bushing rubber for cracks or tears.
Is number 54500EG00A an interchange for this front right lower control arm?
Yes. 54500EG00A is on the interchange line for this arm, along with other cross-reference numbers.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.