Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501030
Mevotech Supreme CMS401100 front left lower control arm with ball joint for the 2012-2018 Ford Focus and other vehicles connects the front left wheel to the chassis and lets it move with the suspension. This control arm and ball joint assembly comes with the ball joint, bushings and dust boot already included.
A worn ball joint or worn bushings can show up as a clunk over bumps, loose or wandering steering, or uneven front tire wear. Before you replace this arm, rule out a worn sway bar link, strut mount or tie rod end, which can make similar noises. The 2012-2018 Ford Focus takes one control arm on this side; the front right is a separate part ordered separately, and the two are normally replaced together.
It is a direct-fit replacement control arm for the 2012-2018 Ford Focus, the 2018-2023 Ford Transit Connect and the 2013-2018 Ford C-MAX.
Fit and size
Build and materials
One control arm with ball joint, bushings and dust boot, plus the 90 degree SAE grease fitting, pinch bolt and locking nut.
Interchange: 810-503776B · 522-811
19327287 · TC2722 · CA14553 · BV6Z3079A · BV6Z3079C · BV6Z3079F · BV6Z3079G · CV6Z3079A · CV6Z3079E · KV6Z3079B · MCF2358 · MCF2447 · RK622788 · 2608155 · 30030697 · 5CB40215 · X15CJ0428 · X15CJ6847 · TK622788
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this suspension control arm for the 2012-2018 Ford Focus the front left lower one?
Yes. Mevotech Supreme CMS401100 is the front left lower control arm with ball joint for the 2012-2018 Ford Focus, and it also fits the 2018-2023 Ford Transit Connect.
What comes with the Mevotech Supreme suspension control arm?
CMS401100 includes the ball joint, rubber bushings, neoprene dust boot, 90 degree SAE grease fitting, and an application-specific pinch bolt and locking nut.
Is the Mevotech Supreme control arm greaseable?
Yes. This arm is pre-greased and has a 90 degree SAE grease fitting, so its sintered bearing can be serviced with grease.
How can I tell if the ball joint on a lower control arm is worn?
A torn or leaking dust boot, a clunk over bumps or uneven front tire wear can mean a worn joint. A shop can test the joint for play safely.
Does Mevotech Supreme CMS401100 interchange with BV6Z3079A?
Yes. BV6Z3079A is on the interchange list for this Mevotech Supreme CMS401100 control arm with ball joint, along with several other numbers.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.