Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS251114
Mevotech Supreme CMS401217 front right lower control arm with ball joint for the 2008-2009 Ford Taurus and other vehicles links the steering knuckle to the vehicle. This Mevotech Supreme control arm, also called a control arm and ball joint assembly, includes the bushings, ball joint and dust boot.
A clunk over bumps, loose or wandering steering and uneven tire wear can mean this arm, its ball joint or its bushings are worn, but a loose tie rod end or sway bar link may be behind them instead. This listing is one arm for the front right; the front left is a separate part, and both sides are normally replaced together.
This is a lower control arm for the 2008-2009 Ford Taurus, and it also fits the 2008-2009 Mercury Sable.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, grease fitting, mounting hardware and a nylon locking nut. This listing holds one arm, and the front right takes one; the front left is ordered separately.
Interchange: 622.61025 · 524-218
19385561 · 8G1Z3078S · 9G1Z3C339A · GS401217 · 2608555 · 30034786 · 9CB40579
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a control arm for the 2008-2009 Ford Taurus?
Yes. Mevotech Supreme CMS401217 is the front right lower control arm with ball joint for the 2008-2009 Ford Taurus.
Will this front right arm also work on the 2008-2009 Mercury Sable?
Yes. Mevotech Supreme CMS401217 fits the 2008-2009 Mercury Sable as well, and the left side is its own separate part.
Does this Mevotech Supreme suspension control arm come with the ball joint and nut?
Yes. The ball joint, bushings, dust boot, grease fitting, mounting hardware and a nylon locking nut are all included with the arm.
Can the ball joint on this control arm be greased?
Yes. The ball joint is pre-greased and greaseable, and a 90 degree SAE grease fitting is included.
How can I tell if a front lower control arm bushing is worn?
A clunk over bumps, vague steering or uneven tire wear can mean worn bushings or a worn ball joint. A shop can check play in the joint safely on a lift.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.