Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS301192
Mevotech Supreme CMS501144 front left upper control arm with ball joint for the 2006-2010 Hummer H3 and other vehicles connects the steering knuckle to the frame. This control arm and ball joint assembly is one piece, and its ball joint pivots with suspension travel.
A clunk over bumps, loose steering or uneven tire wear can mean this arm's bushings or ball joint are worn, though a worn tie rod end or sway bar link can also be behind them, so find the source before replacing it. Upper arms are normally replaced as a left and right pair; this listing is one arm for the front left, since the axle has one on each side, and the front right is ordered separately.
It is a direct-fit replacement front left upper control arm for the 2006-2010 Hummer H3 and the 2009-2010 Hummer H3T.
Fit and size
Build and materials
One control arm assembly. Mounting hardware is not included, so plan on new bolts for the mounting points.
Interchange: 622.69000 · 521-949
19356852 · PGS501144 · TC5329 · CB91007 · CB91007PR · CA10450 · 15082974 · 19354098 · CAK621676 · RK621676 · C6GS501144 · GS501144 · 2605751 · 1441105 · 30034593 · 8CB50525 · X57CJ1068 · JTC2664 · TK621676
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this 2006-2010 Hummer H3 control arm also fit the 2009-2010 Hummer H3T?
Yes. Mevotech Supreme CMS501144 is listed for both the 2006-2010 Hummer H3 and the 2009-2010 Hummer H3T, in the front left upper position.
Does the Mevotech Supreme control arm come with bushings and a dust boot?
Yes. The assembly includes its ball joint, rubber bushings and a rubber dust boot. Mounting hardware is not included, so plan on new bolts for the mounting points.
Is this Mevotech Supreme suspension control arm made of aluminum?
Yes. Mevotech Supreme CMS501144 has an aluminum control arm with rubber bushings, and its ball joint has a surface treatment that prevents rust build-up.
How can I tell the ball joint on an upper control arm is worn?
A torn dust boot with grease leaking out, a clunk over bumps or wandering steering can mean the ball joint is worn. A shop can test the joint for play.
Does this front left upper control arm come pre-greased?
Yes. This control arm is supplied pre-greased, and an application-specific pinch bolt and locking nut for the ball joint are provided.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.