Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501190
Mevotech Supreme CMS501267 front right lower control arm with ball joint for the 2016-2025 Chevrolet Malibu and other vehicles connects the wheel to the suspension and lets it pivot. This Mevotech Supreme suspension control arm is sold as a control arm and ball joint assembly with bushings included.
A clunk over bumps, loose steering or uneven tire wear can mean this arm or its ball joint is worn, though a worn tie rod end or sway bar link can be behind them too. Both sides are normally replaced together; this listing is one arm, for the front right.
This front right lower control arm with ball joint fits the 2016-2025 Chevrolet Malibu, the 2017-2019 Buick LaCrosse and the 2018-2020 Buick Regal Sportback, along with other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One front right control arm with ball joint, bushings and mounting hardware. The front right takes one, and the front left is a separate part.
Interchange: 527-420
19427228 · 84362535 · 23421067 · 23421069 · 84107268 · 84198831 · 84198833 · 84376572 · 84376574 · TC6807 · CB92174 · CA13016 · 2608693 · 30034811 · 9CB50631 · X56CJ0938
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Chevy Malibu control arm fit the 2016-2025 Chevrolet Malibu on the front right side?
Yes. Mevotech Supreme CMS501267 is a front right lower control arm with ball joint for the 2016-2025 Chevrolet Malibu; the front left side is a separate part.
Is this Buick LaCrosse control arm a match for the 2017-2019 Buick LaCrosse?
Yes. Mevotech Supreme CMS501267 fits the 2017-2019 Buick LaCrosse as the front right lower control arm. Use the "Vehicles it fits" section to check your exact model and engine.
Does the Mevotech Supreme control arm come with a grease fitting and locking nut?
Yes. This control arm comes with a 90 degree SAE grease fitting and a part-specific locking nut for the ball joint, plus the bushings and mounting hardware.
What is this front right control arm made of, and how is it protected from rust?
The arm is stamped steel with a filled-in hole/recess and rubber bushings. It has a protective surface treatment to resist rust build-up.
Does Mevotech Supreme CMS501267 replace number 84362535?
Yes. 84362535 is one of the numbers this arm replaces, and the full cross-reference list is on the Interchange line of this page.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.