Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS20372
Mevotech Supreme CMS601156 front upper control arm with ball joint for the 1996-2000 Honda Civic and other vehicles links the wheel to the body while the suspension moves. This control arm and ball joint assembly includes its bushings, so the arm and ball joint are replaced as one unit.
Clunking over bumps, uneven tire wear or steering that wanders can mean a worn ball joint or tired bushings. Before replacing the arm, look it over with the engine off for cracked or torn rubber bushings and other visible damage; a shop can test the joint for play.
It fits the 1996-2000 Honda Civic and the 1997-2000 Acura EL. A 1996-2000 Honda Civic takes two, and so does a 1997-2000 Acura EL. This listing is one arm, and the other side of the front axle is normally replaced at the same time.
Fit and size
Build and materials
One control arm with ball joint and rubber bushings, plus the castle nut and cotter pin.
Interchange: 522-712
19338450 · CB581005 · CB581005PR · CA8763 · 3CB60313 · GS601156 · 2643039 · 30030101
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Honda Civic control arm fit the 1996-2000 Honda Civic and the 1997-2000 Acura EL?
Yes. Mevotech Supreme CMS601156 is a front upper arm for both the 1996-2000 Honda Civic and the 1997-2000 Acura EL; each car takes two.
Does this control arm come with a castle nut and cotter pin?
Yes. The part-specific castle nut and cotter pin are provided for securing the ball joint, and the rubber bushings are included in the assembly.
Is the ball joint on this control arm pre-greased, and what stud does it have?
Yes. Mevotech Supreme CMS601156 has a pre-greased ball joint with a threaded stud and a bolt-in mounting type.
What are signs of a worn upper control arm ball joint or bushing?
Clunking over bumps, uneven tire wear or steering that wanders can mean a worn ball joint or worn bushings. A shop can check the joint for play.
How long and wide is this control arm, and what is it made of?
The steel control arm measures 9.8 in at its maximum length and 8.875 in at its maximum width.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.