Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS861190
Mevotech Supreme CMS701111 front left lower control arm with ball joint for the 2011-2018 Audi A8 Quattro and other vehicles connects the wheel to the front suspension. The control arm and ball joint assembly lets the wheel move over bumps while staying located and able to steer.
A worn control arm or ball joint can bring clunks over bumps, loose steering or uneven tire wear. Those signs alone don't prove this arm is at fault; a worn sway bar link can clunk too. This listing is one arm for the front left. The 2011-2018 Audi A8 Quattro takes one on that side, the right side is ordered separately, and both are normally replaced together.
This control arm with ball joint fits the 2011-2018 Audi A8 Quattro and the 2013-2018 Audi S8.
Fit and size
Build and materials
One control arm with ball joint and rubber bushings.
Interchange: 524-231
19340905 · 4H0407693C · 4H0407693E · 4H0407693F · 4H0407693G · TC3599 · CB12213 · CB12213PR · CA6461 · 4CB70136 · GS701111 · 2607709 · 30036504 · X01CJ0742
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Mevotech Supreme control arm the right one for the 2011-2018 Audi A8 Quattro?
Yes. Mevotech Supreme CMS701111 fits the 2011-2018 Audi A8 Quattro and the 2013-2018 Audi S8, in the front left lower rearward position.
Does this Mevotech Supreme suspension control arm come with bushings?
Yes. Mevotech Supreme CMS701111 includes rubber bushings along with the aluminum control arm and the ball joint.
Is this Mevotech Supreme lower control arm aluminum or steel?
It is aluminum, with rubber bushings. The ball joint stud is threaded.
How do I know if the ball joint on a front lower control arm is worn?
Clunks over bumps, loose-feeling steering and uneven tire wear can mean a worn ball joint or bushing. A shop can measure the play in the joint.
Is the ball joint on the CMS701111 pre-greased, and does it need a nut?
Yes, the ball joint comes pre-greased. A part-specific hex nut is provided for its threaded stud.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.