Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK80387
Mevotech Supreme CMS70163 front right lower control arm with ball joint for the 2007-2013 Volvo C30 and other vehicles links the wheel to the vehicle body. This Mevotech Supreme suspension control arm is a control arm and ball joint assembly, so the arm and ball joint come as one piece.
A clunk over bumps, uneven tire wear or steering that wanders can mean a worn control arm or ball joint. These signs alone do not prove this arm is the problem, since worn sway bar end links can make a similar clunk. This listing is one arm for the front right of the 2007-2013 Volvo C30; the front left is a separate part, and the two sides are normally replaced together.
This arm is listed for several Volvo models, including the 2007-2013 Volvo C30, the 2006-2013 Volvo C70 and the 2006-2011 Volvo S40. It is built to OE-level specifications. To check your exact model and engine, open the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint, rubber bushings and mounting hardware.
Interchange: 101-6555 · 102-6555 · 102-7622 · 622.39046 · 623.39046 · 521-160
88879231 · TC2252 · TC8193 · CB45194PR · CA14370 · CAK620599 · RK620599 · 30036568 · 5072126 · SRK620599 · X15CJ0421 · CP1493 · TK620599 · 312620370 · 31277462 · 312774620 · 31290279 · 312902790
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the 2007-2013 Volvo C30 control arms for the front right side?
Yes. Mevotech Supreme CMS70163 is the front right lower control arm with ball joint for the 2007-2013 Volvo C30. The front left side is a separate part.
Is this the 2006-2011 Volvo S40 control arm for the front right lower position?
Yes. Mevotech Supreme CMS70163 is listed for the front right lower position on the 2006-2011 Volvo S40. Open the "Vehicles it fits" section to check your exact model and engine.
Does this Mevotech Supreme lower control arm come with the ball joint and hardware?
Yes. This control arm includes the ball joint, rubber bushings and mounting hardware.
What is the CMS70163 control arm made of?
The control arm is stamped steel with rubber bushings and a protective surface treatment that resists rust build-up. Its country of origin is Turkey.
Does the ball joint on this control arm need a separate nut?
No. A part-specific nylon locking nut for the ball joint is provided, and the ball joint comes pre-greased.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.