Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS861335
Mevotech Supreme CMS861032 front left upper control arm with ball joint for the 1984-1995 Toyota 4Runner and other vehicles links the wheel to the frame and pivots on its ball joint. This control arm and ball joint assembly replaces the arm and its ball joint together.
A clunk over bumps, loose or wandering steering and uneven front tire wear can mean a worn arm or ball joint. Worn shocks, tie rod ends, wheel bearings or the lower ball joint can be behind the same signs, so find the cause before buying. There is one upper arm on each side of the front axle. This listing is one piece for the front left; the front right is a separate part, and both sides are normally replaced together.
It is a direct-fit replacement for the 1984-1995 Toyota 4Runner, the 1993-1998 Toyota T100 and the 1985-1995 Toyota Pickup.
Fit and size
Build and materials
One control arm with ball joint, grease fitting and mounting hardware.
Interchange: 521-627
88877622 · MGS861032 · TC5206 · TC7081 · CB74137 · CB74137PR · CA12617 · 4CB86159 · CAK620681 · RK620681 · C6GS861032 · GS861032 · 2607875 · 1230168 · 30031067 · 11943 · SRK620681 · 4806735030 · 4806735040
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the upper control arms for the 1984-1995 Toyota 4Runner?
Yes. Mevotech Supreme CMS861032 is the front left upper arm for the 1984-1995 Toyota 4Runner; the front right upper arm is a separate part.
Is this a Toyota T100 control arm for the 1993-1998 model years?
Yes. This front left upper control arm also fits the 1993-1998 Toyota T100, in the same front left upper position.
Does this Mevotech Supreme suspension control arm come with the ball joint?
Yes. Mevotech Supreme CMS861032 includes the bolt-in ball joint, and the mounting hardware is included as well.
What size and material is this front left upper control arm?
The arm is steel, with a maximum length of 14.0 in and a maximum width of 16.5 in. It has a protective surface treatment to resist rust.
Can the ball joint on this control arm be greased?
Yes. It comes pre-greased, and the included grease fitting lets the ball joint be greased later.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.