Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK80387
Mevotech Supreme CMS86105 front left upper control arm with ball joint for the 2002-2010 Lexus SC430 and other vehicles links the wheel to the chassis. This Mevotech Supreme suspension control arm is also called a control arm and ball joint assembly.
A clunk over bumps, uneven front tire wear or loose steering can point to a worn ball joint or bushing. Tie rod ends, struts or wheel bearings can produce those signs as well, so find the cause before replacing this arm.
As a front left upper control arm with ball joint, it fits the 2002-2010 Lexus SC430, the 1998-2005 Lexus GS300 and the 2001-2005 Lexus GS430. This listing is one arm; a 2002-2010 Lexus SC430 takes one in this position, the front right upper is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint and bushings, plus a grease fitting, a slotted castle nut and a snap cotter pin.
Interchange: ATM 10124123 · 101-5782 · 102-5782 · 622.44049 · 520-457 · SH-25004
19290131 · 65979 · TC2932 · CB64007 · CB64007PR · CB64027 · CB64027PR · CAK620336 · ICA520457 · 4863039055 · K620336 · RK620336 · 2605813 · 30030532 · SK520457 · JTC7595 · CP1048 · TK620336
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this front left upper part the 1998-2005 Lexus GS300 control arm?
Yes. Mevotech Supreme CMS86105 fits the 1998-2005 Lexus GS300 in the front left upper position. If your car is another Lexus, look it up in the "Vehicles it fits" section.
Does the 2002-2010 Lexus SC430 control arm come with the ball joint built in?
Yes. This front left upper arm for the 2002-2010 Lexus SC430 has a ball joint with a threaded stud, so the arm and ball joint come as one assembly.
Is this Mevotech Supreme control arm greaseable?
Yes. Mevotech Supreme CMS86105 comes pre-greased and includes a 180 degree SAE grease fitting for later servicing.
Do I get a castle nut and cotter pin with this control arm?
Yes. A part-specific slotted castle nut and an easy snap cotter pin are provided to secure the ball joint. The bushings and grease fitting are included too.
What is this control arm made of?
Mevotech Supreme CMS86105 is forged steel with a protective surface treatment against rust. It has rubber bushings and a sintered metal bearing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.