Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS101482
Mevotech Supreme CMS90183 front left upper control arm with ball joint for the 2011-2014 Hyundai Equus and other vehicles links the wheel to the chassis. Mevotech Supreme control arms are built for high-usage commercial and passenger vehicles.
A worn control arm or ball joint can show up as a clunk over bumps, loose steering or uneven tire wear. Those signs have other possible sources, so with the engine off, look the rubber bushings and ball joint over for cracks, tears or leaking grease before replacing the arm. This listing is one arm for the front left; the front right is a separate part, and both sides are normally replaced together.
It is a direct-fit replacement for the 2011-2014 Hyundai Equus and the 2009-2014 Hyundai Genesis.
Fit and size
Build and materials
One control arm with ball joint, with rubber bushings and mounting hardware. The front left takes one; the front right is ordered separately.
Interchange: 101-7163 · 102-7163 · 622.51036 · 521-741
19288823 · TC7407 · CB60067 · CB60067PR · CA2232 · 544053M000 · 2CB90099 · RK621569 · GS90183 · 2606401 · 30030276 · 5021339 · X18CJ0851
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme CMS90183 fit the 2011-2014 Hyundai Equus?
Yes. The Mevotech Supreme CMS90183 is a front left upper control arm with ball joint that fits the 2011-2014 Hyundai Equus.
Is this a control arm for the 2009-2014 Hyundai Genesis on the front left upper side?
Yes. This front left upper control arm with ball joint fits the 2009-2014 Hyundai Genesis. The right side is a separate part.
What is this Mevotech Supreme suspension control arm made of?
The Mevotech Supreme CMS90183 has a steel control arm with rubber bushings and a threaded ball joint stud. It is up to 11.25 in long and 2.0 in wide.
Does this control arm and ball joint assembly come with a castle nut and cotter pin?
Yes. It includes the castle nut and cotter pin that secure the ball joint, plus rubber bushings and mounting hardware. The ball joint is pre-greased.
Is 544053M000 a number this control arm replaces?
Yes. 544053M000 is on the interchange list for the Mevotech Supreme CMS90183, along with the other numbers printed on this page.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.