Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS861289
Mevotech Supreme CMS101579 front right lower control arm with ball joint for the 2021-2025 BMW Alpina XB7 and other vehicles connects the wheel to the chassis. Also called a control arm and ball joint assembly, this Mevotech Supreme suspension control arm includes the ball joint, bushings and dust boot.
A clunk over bumps, uneven tire wear or loose-feeling steering can mean a worn ball joint or worn bushings. A sway bar link, strut or tie rod can be behind those signs too, so find the cause before you buy an arm. Front arms are normally replaced as a pair, so plan on the left one as well; this listing is a single arm for the right side.
This front right lower control arm with ball joint is built for the 2021-2025 BMW Alpina XB7, the 2019-2025 BMW X5 and the 2020-2025 BMW X6, among other vehicles. If your car is not named here, find your year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with the ball joint, rubber bushings and rubber dust boot, plus mounting hardware and a part-specific nylon locking nut. This listing holds one arm for the front right; that side takes one, and the front left is a separate part.
Interchange: 19531461 · 31106893550 · 31108866774 · CB15224 · 2CB10918 · 2609588 · X05CJ1439
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is CMS101579 the right BMW X5 control arm for a 2019-2025 model?
Yes. Mevotech Supreme CMS101579 fits the 2019-2025 BMW X5 in the front right lower forward position. Other vehicles are covered in the "Vehicles it fits" section.
Does this control arm come with a locking nut and bushings?
Yes. This control arm comes with its rubber bushings, rubber dust boot, mounting hardware and a part-specific nylon locking nut for the ball joint.
Is this Mevotech Supreme lower control arm pre-greased?
Yes. Mevotech Supreme CMS101579 has a pre-greased ball joint and a rubber dust boot.
What are signs a control arm ball joint is wearing out?
A clunk over bumps, uneven tire wear or loose steering can point to a worn ball joint. A shop can check the joint for play and the boot and bushings for damage.
Is the control arm made of forged steel?
Yes. Mevotech Supreme CMS101579 is a steel control arm with forged steel construction and a protective surface treatment to resist rust.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.