Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501190
Mevotech Supreme CMS101581 front right lower control arm with ball joint for the 2019-2025 BMW X7 and other vehicles links the wheel to the body. This Mevotech Supreme suspension control arm is also called a control arm and ball joint assembly.
A clunk over bumps, wandering steering or uneven tire wear can mean worn bushings or a worn ball joint. Sway bar links, struts and tie rod ends can be behind those signs as well, so track down the source before you order. This listing is one arm for the front right; the front left is ordered separately, and the two sides are normally replaced together.
This Mevotech Supreme lower control arm fits the 2019-2025 BMW X7, the 2021-2024 BMW Alpina XB7 and the 2019-2024 BMW X5, among other vehicles. It is a direct-fit replacement built to OE-level specifications. If your BMW is a different model or year, find it in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, nylon locking nut and mounting hardware.
Interchange: 526-008
31106878082 · 31108866772 · CB15184 · 2CB10933 · 2609658 · X05LA0360
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the front right BMW X5 control arm for a 2019-2024 BMW X5?
Yes. Mevotech Supreme CMS101581 fits the 2019-2024 BMW X5 in the front right lower position. For other BMW models and years, look in the "Vehicles it fits" section.
Is the Mevotech Supreme control arm pre-greased?
Yes. The Mevotech Supreme CMS101581 is pre-greased and comes with rubber bushings and a dust boot.
Does the front right lower arm come with a locking nut and hardware?
Yes. Along with the arm and its ball joint, the box holds a part-specific nylon locking nut, mounting hardware, bushings and a dust boot.
What material is this ball joint control arm made of?
The control arm is steel with rubber bushings, and a protective surface treatment helps prevent rust build-up. The ball joint has a threaded stud.
How can I tell if the control arm bushings or ball joint are worn?
A clunk over bumps, vague steering or uneven tire wear can mean the bushings or ball joint are worn. A shop can inspect the bushings, the dust boot and the ball joint play.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.