Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS25165
Mevotech Supreme CMS101618 front left upper control arm with ball joint for the 2020-2024 Mercedes-Benz GLE350 and other vehicles connects the wheel assembly to the chassis and pivots at the ball joint. This Mevotech Supreme suspension control arm and ball joint assembly is sold as one unit, ball joint included.
A clunk over bumps, loose steering or uneven tire wear can point to a worn arm, though other suspension parts cause the same signs. With the engine off, first look for a torn dust boot, leaking grease or cracked bushings. Both front upper arms are normally replaced together; this listing is the front left one, and the front right is a separate part.
Listed for a wide range of Mercedes-Benz models, this control arm is a direct-fit replacement for the 2020-2024 Mercedes-Benz GLE350, the 2020-2024 Mercedes-Benz GLE450 and the 2022-2024 Mercedes-Benz GLE450 SUV.
Fit and size
Build and materials
One front left upper control arm with ball joint, rubber bushings, a dust boot, the part-specific locking nut and mounting hardware.
Interchange: 19531449 · 3CB10919 · 1673301300 · 2609589
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme CMS101618 fit the 2020-2024 Mercedes-Benz GLE350?
Yes, Mevotech Supreme CMS101618 is the front left upper control arm for the 2020-2024 Mercedes-Benz GLE350, and it is listed for many other models; check your own car in the "Vehicles it fits" section.
Is this Mevotech Supreme control arm sold with the ball joint and bushings?
Yes. Mevotech Supreme CMS101618 comes with the ball joint, rubber bushings, a rubber dust boot and mounting hardware.
Is the ball joint on this front left upper control arm press-in or threaded?
The ball joint is a press-in mounting type with a threaded stud, and the arm itself is forged aluminum with a protective surface treatment.
How do I know if a front upper control arm or its ball joint is worn?
A clunk over bumps, loose steering or uneven tire wear can mean a worn arm, ball joint or bushings. Checking play in the joint needs the car raised, so have a shop test it.
What speeds up ball joint installation on this control arm?
A part-specific locking nut is provided for the ball joint. The Labor Saver design, tools and hardware are meant to make installation faster and easier.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.