Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS101482
Mevotech Supreme CMS101619 front right upper control arm with ball joint for the 2020-2024 Mercedes-Benz GLE350 and other vehicles links the front right wheel to the chassis. This Mevotech Supreme suspension control arm is sold as a control arm and ball joint assembly, so the ball joint comes attached.
A clunk over bumps, loose steering or uneven front tire wear can mean this control arm or its ball joint is worn, though a worn tie rod end or sway bar link can produce similar signs, so pin down the source before buying. This listing is one control arm for the front right; the front left is a separate part, and both sides are normally replaced together.
This front right upper control arm fits the 2020-2024 Mercedes-Benz GLE350, the 2020-2024 Mercedes-Benz GLE450 and the 2022-2024 Mercedes-Benz GLE450 SUV, and it is a direct-fit replacement for these vehicles. If your Mercedes-Benz is not named here, look up your own year and model in the "Vehicles it fits" section further down this page.
Fit and size
Build and materials
One control arm with ball joint, rubber bushings, rubber dust boot, mounting hardware and a part-specific locking nut. This listing holds one control arm, and the front right position takes one.
Interchange: 19531450 · 3CB10910 · 1673301400 · 2609590
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Mevotech Supreme CMS101619 fit the 2020-2024 Mercedes-Benz GLE450?
Yes. Mevotech Supreme CMS101619 is a front right upper control arm with ball joint that fits the 2020-2024 Mercedes-Benz GLE450. For other years and models, use the "Vehicles it fits" section.
Does this control arm include the bushings and mounting hardware?
Yes. The assembly includes rubber bushings, mounting hardware, the ball joint, a rubber dust boot and a part-specific locking nut.
Is the Mevotech Supreme control arm ball joint pre-greased?
Yes. The ball joint is pre-greased, has a threaded stud and a rubber dust boot, and uses press-in mounting.
Is this control arm made of forged aluminum?
Yes. Mevotech Supreme CMS101619 is aluminum with forged construction and a protective surface treatment against rust. Its bushings and dust boot are rubber.
Can a clunk over bumps mean this upper control arm is worn?
Yes, it can, along with loose steering or uneven front tire wear. Have a shop inspect the control arm, ball joint and bushings promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.