Mevotech Supreme CMS401185 front left lower control arm with ball joint for the 2013-2020 Ford Fusion and other vehicles links the wheel to the chassis and pivots on its ball joint. This Mevotech Supreme suspension control arm is a control arm and ball joint assembly, so the joint comes built in.
- Mevotech Supreme line, engineered in-house with application-specific upgrades
- Patented BiMetallic technology: greaseable sintered bearing for high heat and high load in tight spaces
- Forged aluminum control arm with a thicker cross section
- Ball joint with an added surface treatment that prevents rust build-up
- Bushings upgraded with a solid cross section for added stiffness and durability
Quick facts
- Part: Mevotech Supreme CMS401185 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2013-2020 Ford Fusion and other vehicles
- Position: Front left lower
- Material: Aluminum
- Condition: New
A clunk over bumps, uneven tire wear or a loose steering feel can mean this arm or its ball joint is worn. These signs alone do not prove the arm is at fault, since a worn tie rod end can feel much the same. The front arms are normally replaced as a pair. This listing is one arm for the front left; the car takes one on each side of the front axle, and the front right is ordered separately.
Fits
This is a direct-fit control arm replacement for a wide range of Ford and Lincoln models, including the 2013-2020 Ford Fusion, the 2019-2020 Ford Police Responder Hybrid and the 2019-2020 Ford SSV Plug-In Hybrid.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1 for this side
- Maximum width: 15.2 in
- Maximum length: 19.15 in
- Ball joint stud type: Grooved
Build and materials
- Control arm material: Aluminum
- Bushing material: Rubber
- Bearing material: Sintered metal
- Greaseable: Yes
- Condition: New
- Country of origin: China
In the box
One control arm with ball joint, with its bushings, a 90 degree SAE grease fitting, and an application-specific pinch bolt and locking nut.
Installation notes
- Comes pre-greased.
- Labor Saver™ designs, tools and hardware are meant to make installation faster and easier.
Frequently Asked Questions
Is the Mevotech Supreme CMS401185 a 2013-2020 Ford Fusion control arm for the front left lower position?
Yes. Mevotech Supreme CMS401185 fits the 2013-2020 Ford Fusion and the 2019-2020 Ford Police Responder Hybrid at the front left lower position. If your car is not named here, find it in the "Vehicles it fits" section.
What hardware comes with the Mevotech Supreme CMS401185?
Mevotech Supreme CMS401185 comes with its bushings, a 90 degree SAE grease fitting, and an application-specific pinch bolt and locking nut for the ball joint.
How do I know if the front left lower control arm on my car is worn?
A clunk over bumps, uneven tire wear or loose steering feel can point to wear. With the car parked and cool, look for cracked or torn rubber bushings; a shop can test ball joint play.
Can the Mevotech Supreme control arm be greased?
Yes. This arm has a greaseable sintered bearing and comes with a 90 degree SAE grease fitting. It also comes pre-greased.
What materials is this front left lower control arm made of?
The control arm is aluminum, the bushings are rubber and the bearing is sintered metal. The ball joint stud is grooved.
