Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMK80348
Mevotech Supreme CMS401286 front left lower control arm with ball joint for the 2020-2025 Ford Explorer and other vehicles joins the wheel to the chassis and pivots on its ball joint. The forged aluminum construction meets or exceeds OE specifications.
A clunk over bumps, loose steering or uneven front tire wear can mean this control arm, its bushings or the ball joint is worn, though a sway bar link or strut mount can be behind the same signs, so find the source before replacing anything. The 2020-2025 Ford Explorer takes one on the front left; this listing is that single arm, the front right is ordered separately, and the two are normally fitted together.
This lower control arm is a direct-fit replacement for the 2020-2025 Ford Explorer and the 2020-2025 Ford Police Interceptor Utility. The same part is listed as a control arm and ball joint assembly.
Fit and size
Build and materials
One control arm with ball joint, bushings, a neoprene dust boot, mounting hardware, a 180 degree SAE grease fitting and a nylon locking nut.
Interchange: 19531591 · LB5Z3083A · LB5Z3083B · 2609634 · 9CB403111
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a control arm for the 2020-2025 Ford Explorer?
Yes. Mevotech Supreme CMS401286 is the front left lower forward control arm with ball joint for the 2020-2025 Ford Explorer. The right side is a separate part.
Is this Mevotech Supreme suspension control arm greaseable?
Yes. Mevotech Supreme CMS401286 is pre-greased and greaseable, and it comes with a 180 degree SAE grease fitting.
Does this control arm come with a locking nut and dust boot?
Yes. A part-specific nylon locking nut, a neoprene dust boot, the bushings and mounting hardware are included with the arm and its ball joint.
What are the bushings and bearing made of on this control arm?
The bushings are rubber with a double-bonded upgrade, and the bearing is sintered metal. The arm itself is aluminum.
Which noises can come from a worn control arm ball joint?
A clunk over bumps, loose steering feel or uneven front tire wear can mean the arm, its bushings or its ball joint is worn. A shop can inspect the suspension to confirm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.