Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS86142
Mevotech Supreme CMS501335 front left lower control arm with ball joint for the 2019-2026 Chevrolet Silverado 1500 and other vehicles connects the wheel to the chassis. This Mevotech Supreme suspension control arm includes the ball joint, rubber bushings and a dust boot.
As a control arm and ball joint assembly, it replaces the arm and joint as one piece. A clunk over bumps, loose steering or uneven front tire wear can mean the arm or joint is worn. Before you replace the arm, rule out sway bar links, tie rod ends and wheel bearings, which can make similar noises.
The 2019-2026 Chevrolet Silverado 1500, 2019-2026 GMC Sierra 1500 and 2021-2026 Chevrolet Tahoe all fit this arm, and so do many other trucks and SUVs. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section. The front axle has one arm per side; this listing is the front left lower, the front right is a separate part, and both are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, rubber bushings, dust boot, grease fitting and mounting hardware.
Interchange: 19534163 · 84973288 · 84410124 · 84586488 · 84628882 · 84729618 · 84973286 · 85662940 · 85662942 · CA16515 · 2609002 · 11CB503313
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Tahoe control arm fit the 2021-2026 Chevrolet Tahoe?
Yes. Mevotech Supreme CMS501335 is the front left lower arm for the 2021-2026 Chevrolet Tahoe. The front right side is a separate part.
Is this one of the Silverado 1500 control arms for the 2019-2026 Chevrolet Silverado 1500?
Yes. CMS501335 fits the 2019-2026 Chevrolet Silverado 1500 in the front left lower position, and the right side takes its own arm.
Does the CMS501335 arm come with the ball joint and bushings?
Yes. Mevotech Supreme CMS501335 includes the ball joint, rubber bushings, dust boot, grease fitting and mounting hardware.
Is the ball joint on this front lower control arm greaseable?
Yes. The arm comes pre-greased and is greaseable, with a flush-style SAE grease fitting included for later servicing.
How does the ball joint attach to this control arm?
The ball joint is a press-in type with a threaded stud, and a part-specific nylon locking nut is provided for the stud.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.